`
| | IP CAM User’ Guide |
| | Pan/Tilt IP Surveillance Camera |
| | | |
| | | |
| | Web Server Port Number, need to be | |
| | configured | |
| | | |
| Suitable Objects | Users with one fixed physical IP, IP Share and | |
| | several IP-CAMs installed | |
| | | |
1.Set a real physical IP address (e.g., 211.78.174.01) for the public IP of IP Share. Then, set another private IP address and activate the DHCP server function of IP Share.
2.In the IP configuration for each IP-CAM, please assign different virtual IP address internally and respectively. In the Http Port setting, please specify different port parameters. (Please refer to 2.4-1 STATIC - IP Address Settings to fill in the IP address properly.)
3.For the port transformation in IP Share, please refer to IP and port settings of camera to configure accordingly.
4.For viewing images in IP-CAM from remote computer: Open IP browser and type in the IP address of IP Share and the port number of IP-CAM, e.g., http:// 211.78.174.01:1025.
2.6INSTALLATION FOR IP SHARE
When IP-CAM is installed under IP Share, it can obtain a dynamic IP address from DHCP server. If you want to install the IP-CAM in WAN interface, you have to set a fixed IP address for the device. No matter whether your IP Share has the function of virtual server, it is necessary for IP-CAM to set a fixed IP address.
(1)Please use CAM_EZ Search to set a fixed IP address for IP-CAM, e.g., 192.168.0.120 and change the http port number (1025~35534). ( refer to Figure
IP CAM USER’S GUIDE | PAGE 22/57 | Rev. PV1.0 |