SMC Networks None manual Camez Search

`

IP CAM User’ Guide

Pan/Tilt IP Surveillance Camera

2.UTILITIES AND TOOLS

2.1 CAM_EZ SEARCH

CAM_EZ Search is an IP search engine offered by this product. It can search IP CAM connected in LAN. Through sending the inquiry of broadcasting packets, after IP CAM responds the question, the window will display a list of all IP CAMs in the network. And it allows you to modify the network settings of specified IP CAM, such as IP address or IP CAM naming.

CAM_EZ Search Screen

IP CAM List

Renew List

MAC address

IP CAM Name

IP address

Subnet Mask

Default Gateway

Communication Port

Audio UDP port

Version of

CAM_EZ

Search

Display the way to get IP

Version of IP CAM

Choose the

way to get IP

Key in PPPoE

Renew executed to obtain an IP

Figure 1

2.2USE IP-CAMAND TEST THE IMAGE FUNCTION FOR THE FIRST TIME

：The following connection is suitable for IP-CAM test/fixed IP address change/program code update (strongly recommended).

The operation steps are listed below:

A.Installing the Product for the first time:

• You computer must be equipped with network card and RT-45 network connector.

• Connect the RJ-45 terminator on the rear of IP-CAM to the red test network cable. One end is connected to the network card of computer; the other end is connected to the rear side of the IP-CAM.

• Connect the power adaptor to the power port (on the rear) of IP-CAM. Now, the status LED on the top of IP-CAM will light up.

IP CAM USER’S GUIDE PAGE 8/57 Rev. PV1.0