`
IP CAM User’ Guide
Pan/Tilt IP Surveillance Camera
change in the MD range. The lower the number entered, the higher the sensitivity of the MD.
When motion is detected, the screen should display an MD warning in red in the upper left hand corner if there is movement within MD1 or MD2, as shown in below:
-Any motion detection range can be selected in 640x480 and 320x240 resolutions
-In 160x120 resolution, the motion detection is fixed to the entire image.
Note:
1.Motion Detection can exist PC and SD Card
2.Image that MD reaches PC is stored to C: \tmp\webmd
5.ADVANCED APPLICATION
This chapter explains the advanced settings for the IP CAM, including:
-Image Setup
-Capture View
-Network Setup
-Server Setup
-Event Trigger Setup
-Administration Setup
-Software Update
5.1IMAGE SETUP
This includes:
-Resolution:Users can select between image resolution of 160x120, 320x240, and 640x480. The default resolution is 320x240.
-Quality: Users can select between “fine”, “normal”, and “basic”image quality. The default image quality is “basic”.
-
-Audio:Audio output. Default setting is “off”.
-Rotate 180:This setting turns the image
IP CAM USER’S GUIDE | PAGE 34/57 | Rev. PV1.0 |