`
IP CAM User’ Guide
| | Pan/Tilt IP Surveillance Camera |
| | | |
| | | |
| IP Share or LAN Hub | Not necessary | |
| | | |
| Network Setup for IP -CAM | LAN Enable / Manually | |
| | Web Server Port Number, no need to be | |
| | adjusted | |
| | | |
| Suitable Objects | Users with permanent ADSL, one fixed | |
| | physical IP address and one IP-CAM installed | |
| | | |
1.Connect the RJ-45 terminator on the rear of IP-CAM to the red test network cable. One end is connected to the network card of computer; the other end is connected to the rear side of the IP-CAM.
2.Refer to 2.4-1 STATIC –IP Address Settings to typing the IP address properly.
3.Set up the IP-CAM with fixed IP address.
4.For viewing images in IP-CAM from remote computer: Open IP browser and type in the physical IP address of the IP-CAM, e.g., http://211.78.174.94.
：. IP-CAM Network Framework Installation 5
| Way to access Internet | Use dial-up ADSL or Cable Modem | |
| | | |
| Physical IP Address | Owns one float IP address (dispatched by ISP | |
| | | |
| | | |
IP CAM USER’S GUIDE | PAGE 19/57 | Rev. PV1.0 |
