Vivotek IP7251 manual Http

Page 27

VIVOTEK - A Leading Provider of Multimedia Communication Solutions

►Enabling UPnP port forwarding allows the Network Camera to open secondary HTTP port on the router, not HTTP port, meaning that you have to add the secondary HTTP port number behind the Network Camera’s public address in order to access the Network Camera from the Internet. For example, when the HTTP port is set to 80 and the secondary HTTP port is set to 8080, refer to the list below for the Network Camera’s IP address.

From the Internet

In a LAN

http://203.67.124.123:8080

http://192.168.4.160 or

 

http://192.168.4.160:8080

►If the PPPoE settings are incorrectly configured or the Internet access is not working, restore the

Network Camera to factory default; please refer to Restore on page 59 for details. After the Network Camera is reset to factory default, it is accessible in a LAN.

HTTP

Authentication: Depending on your network security requirements, the Network Camera provides two

types of security settings for a HTTP transaction: basic and digest. If basic authentication is selected, the password is sent in plain text format; there can be potential risks of being intercepted. If digest authentication is selected, user credentials are encrypted in MD5 algorithm and thus provide better protection against unauthorized accesses.

HTTP port / Secondary HTTP port: By default, the HTTP port is set to 80 and the secondary HTTP port is set to 8080. Also, they can be assigned with another port number between 1025 and 65535. If the ports are incorrectly assigned, the following warning messages are displayed:

To access the Network Camera within a LAN, both HTTP port and secondary HTTP port can be used to access the Network Camera. For example, when the HTTP port is set to 80 and the secondary HTTP port is set to 8080, refer to the list below for the Network Camera’s IP address.

In a LAN

http://192.168.4.160 or

http://192.168.4.160:8080

Access name for stream 1 / Access name for stream 2: The access name is used to differentiate the streaming source. When using Mozilla Firefox or Netscape to access the Network Camera, and the video mode is set to JPEG, users will receive continuous JPEG pictures. This technology, known as “server push”, allows the Network Camera to feed live pictures to Mozilla Firefox and Netscape.

Use http://<ip address>:<http port>/<access name for stream1 or stream2> to make connection.

User's Manual - 27

Page 26 Page 28
Image 27
Page 26 Page 28
Contents Page Table of Contents Read before use Package contentsLens Physical descriptionDI/DO Diagram Hardware Reset Hardware installationNetwork deployment Setup the Network Camera over the InternetInternet connection with static IP Set up the Network Camera through Power over Ethernet PoE RoHS Software installationUsing web browsers Accessing the Network CameraPage Using Rtsp players MPEG-4 Using 3GPP-compatible mobile devicesUsing Vivotek recording software Main Live Video Window Video title Title and time Client Settings MP4 Saving Options System SystemSystem Time DI and do Manage User Root PasswordSecurity Add UserNetwork Type NetworkPPPoE Point-to-point over Ethernet Page Http Two way audio FTP Rtsp Streaming Page Ddns Ddns Dynamic domain name serviceCustomSafe100 Access list Allowed list / Denied listDelete allowed list / Delete denied list Audio and video Video settingsImage Settings Privacy mask CCD Settings Page Audio settings Motion detection To enable motion detection, follow the steps belowPercentage = 30% Camera control RS485 SettingsCustom Command Preset PositionNetwork Camera Application Media SettingsSnapshot20080104100341 Server Settings Page Page Event Settings Page Recording Recording SettingsPage Video content analysis Page System log Remote LogCurrent Log View parameters Maintenance RebootRestore Upload / Export Daylight Saving Time Configuration File Upgrade Firmware Page Appendix URL Commands of the Network CameraGeneral CGI URL syntax and parameters Security levelGet server parameter values Parameter pair Set server parameter values UpdateValid Values Description Available parameters on the serverName Value Default Security Vegas, SanFrancisco, Vancouver Page None Name Value Default Security Description Name Value Default Name 5060 SIP port Capability.protocol.sip=1 External camera VGA Cmos PAL CCD Get/set Brightness Adjust brightness of image TZO Get/set Boolean Level To control Uart Null Function Bit 3 = Support tilt operation Output Parameter Value Iva indicates Intelligent Video Parameter Value Default Security Description Httpusername String64 Indicate the prefix Max size for one file in Kbytes Drive the digital output Query status of the digital input Capture single snapshot Query status of the digital outputQuality Account managementSystem logs Post data Upgrade firmwareRecall capability.ptzenabled=1 Value Description System InformationIP filtering Preset Locations capability.ptzenabled=1End parameters are specified, it will try to remove Uart Http tunnel channel capability.nuart0Open the network streamings Get SDP of StreamingsPage Specifications Technical SpecificationsTechnology License Notice Electromagnetic Compatibility EMC
Top Page Image Contents