Vivotek IP7251 manual Uart Http tunnel channel capability.nuart0

VIVOTEK - A Leading Provider of Multimedia Communication Solutions

Method	addallow	Add a set of allow IP address range to server. Start	and end
		parameters must be specified. If the index parameter is
		specified, it will try to add starting from index position.
	adddeny	Add a set of deny IP address range to server. Start	and end
		parameters must be specified. If the index parameter is
		specified, it will try to add starting from index position.
	deleteallow	Remove a set of allow IP address range from server. If start
		and end parameters are specified, it will try to remove the
		matched IP address. If index is specified, it will try to remove
		the address from given index position. [start, end] parameters
		have higher priority then the [index] parameter.
	deletedeny	Remove a set of deny IP address range from server. If start
		and end parameters are specified, it will try to remove the
		matched IP address. If index is specified, it will try to remove
		the address from given index position. [start, end] parameters
		have higher priority then the [index] parameter.
start	<ip address>	The start IP address to add or to delete.
end	<ip address>	The end IP address to add or to delete.
index	<value>	The start position to add or to delete.
return	<return page>	Redirect to the page <return page> after the parameter is
		assigned. The <return page> can be a full URL path or relative
		path according the the current path. If you omit this
		parameter, it will redirect to an empty page.

UART HTTP tunnel channel (capability.nuart>0)

Note: This request requires operator privilege

Method: GET and POST

Syntax:

http://<servername>/cgi-bin/operator/uartchannel.cgi?[channel=<value>]

-------------------------------------------------------------------------

GET /cgi-bin/operator/uartchannel.cgi?[channel=<value>] x-sessioncookie: string[22]

accept: application/x-vvtk-tunnelled

pragma: no-cache

104 - User's Manual