Vivotek IP7251 manual DI/DO Diagram

Page 5

VIVOTEK - A Leading Provider of Multimedia Communication Solutions

DI/DO Diagram

Refer to the following illustration for connection method.

12V

PIN 1

Power+12V

PIN 2

Digital output

+12V

PIN 3

Digital input

PIN 4

Ground

Status LED

The LED indicates the status of the Network Camera.

	Status LED	Description
	Blinking red (short)	1. The Network Camera is booting up.
	Blinking red (short)	2. Reboot or restore the Network Camera.
		2. Reboot or restore the Network Camera.
	Steady green (long)	The Network Camera is trying to obtain an IP address.
	Blinking green every other second	The network is setup (system up).
	Fast blink orange	During the upgrade firmware process.

User's Manual - 5

Image 5

Contents Page Table of Contents Read before use Package contentsLens Physical descriptionDI/DO Diagram Hardware Reset Hardware installationNetwork deployment Setup the Network Camera over the InternetInternet connection with static IP Set up the Network Camera through Power over Ethernet PoE RoHS Software installationUsing web browsers Accessing the Network CameraPage Using Rtsp players MPEG-4 Using 3GPP-compatible mobile devicesUsing Vivotek recording software Main Live Video Window Video title Title and time Client Settings MP4 Saving Options System Time SystemSystem DI and do Security Root PasswordAdd User Manage UserNetwork Type NetworkPPPoE Point-to-point over Ethernet Page Http Two way audio FTP Rtsp Streaming Page Ddns Ddns Dynamic domain name serviceCustomSafe100 Delete allowed list / Delete denied list Access listAllowed list / Denied list Audio and video Video settingsImage Settings Privacy mask CCD Settings Page Audio settings Motion detection To enable motion detection, follow the steps belowPercentage = 30% Camera control RS485 SettingsCustom Command Preset PositionNetwork Camera Application Media SettingsSnapshot20080104100341 Server Settings Page Page Event Settings Page Recording Recording SettingsPage Video content analysis Page Current Log System logRemote Log View parameters Restore MaintenanceReboot Upload / Export Daylight Saving Time Configuration File Upgrade Firmware Page Appendix URL Commands of the Network CameraGet server parameter values General CGI URL syntax and parametersSecurity level Parameter pair Set server parameter values UpdateValid Values Description Available parameters on the serverName Value Default Security Vegas, SanFrancisco, Vancouver Page None Name Value Default Security Description Name Value Default Name 5060 SIP port Capability.protocol.sip=1 External camera VGA Cmos PAL CCD Get/set Brightness Adjust brightness of image TZO Get/set Boolean Level To control Uart Null Function Bit 3 = Support tilt operation Output Parameter Value Iva indicates Intelligent Video Parameter Value Default Security Description Httpusername String64 Indicate the prefix Max size for one file in Kbytes Drive the digital output Query status of the digital input Capture single snapshot Query status of the digital outputQuality Account managementSystem logs Post data Upgrade firmwareRecall capability.ptzenabled=1 Value Description System InformationIP filtering Preset Locations capability.ptzenabled=1End parameters are specified, it will try to remove Uart Http tunnel channel capability.nuart0Open the network streamings Get SDP of StreamingsPage Specifications Technical SpecificationsTechnology License Notice Electromagnetic Compatibility EMC