Vivotek IP7251 manual Camera control, RS485 Settings

Page 43

VIVOTEK - A Leading Provider of Multimedia Communication Solutions

Camera control

This section explains how to control the Network Camera’s Pan/Tilt/Zoom operation by connecting with a

PTZ driver or scanner via RS485 interface.

RS485 Settings

Disable: Select this option to disable this function.

PTZ camera: Select this option to enable PTZ operation.

To utilize this feature, please connect the Network Camera with a PTZ driver or scanner via RS485 interface first. And then you can configure the PTZ driver and RS485 port settings in the following diagram.

VIVOTEK offers three PTZ drivers: DynaDome/SmartDOME, Lilin PIH-7x00 and Pelco D protocol. If none of the above PTZ drivers is supported by your PTZ scanner, please select Custom camera (scanner). please refer to the user’s manual of your PTZ scanner to set the Camera ID, PTZ driver, and Port settings. The Camera ID is necessary for multiple cameras control. If you select PTZ camera and click Save to enable this function, the camera control panel will be displayed in the main page as the following diagram:

http://192.168.5.117/index.html

Network Camera

User's Manual - 43

Image 43

Contents Page Table of Contents Read before use Package contentsLens Physical descriptionDI/DO Diagram Hardware Reset Hardware installationNetwork deployment Setup the Network Camera over the InternetInternet connection with static IP Set up the Network Camera through Power over Ethernet PoE RoHS Software installationUsing web browsers Accessing the Network CameraPage Using Rtsp players MPEG-4 Using 3GPP-compatible mobile devicesUsing Vivotek recording software Main Live Video Window Video title Title and time Client Settings MP4 Saving Options System SystemSystem Time DI and do Manage User Root PasswordSecurity Add UserNetwork Type NetworkPPPoE Point-to-point over Ethernet Page Http Two way audio FTP Rtsp Streaming Page Ddns Ddns Dynamic domain name serviceCustomSafe100 Allowed list / Denied list Access listDelete allowed list / Delete denied list Audio and video Video settingsImage Settings Privacy mask CCD Settings Page Audio settings Motion detection To enable motion detection, follow the steps belowPercentage = 30% Camera control RS485 SettingsCustom Command Preset PositionNetwork Camera Application Media SettingsSnapshot20080104100341 Server Settings Page Page Event Settings Page Recording Recording SettingsPage Video content analysis Page Remote Log System logCurrent Log View parameters Reboot MaintenanceRestore Upload / Export Daylight Saving Time Configuration File Upgrade Firmware Page Appendix URL Commands of the Network CameraSecurity level General CGI URL syntax and parametersGet server parameter values Parameter pair Set server parameter values UpdateValid Values Description Available parameters on the serverName Value Default Security Vegas, SanFrancisco, Vancouver Page None Name Value Default Security Description Name Value Default Name 5060 SIP port Capability.protocol.sip=1 External camera VGA Cmos PAL CCD Get/set Brightness Adjust brightness of image TZO Get/set Boolean Level To control Uart Null Function Bit 3 = Support tilt operation Output Parameter Value Iva indicates Intelligent Video Parameter Value Default Security Description Httpusername String64 Indicate the prefix Max size for one file in Kbytes Drive the digital output Query status of the digital input Capture single snapshot Query status of the digital outputQuality Account managementSystem logs Post data Upgrade firmwareRecall capability.ptzenabled=1 Value Description System InformationIP filtering Preset Locations capability.ptzenabled=1End parameters are specified, it will try to remove Uart Http tunnel channel capability.nuart0Open the network streamings Get SDP of StreamingsPage Specifications Technical SpecificationsTechnology License Notice Electromagnetic Compatibility EMC