Vivotek IP7251 manual Image Settings

Page 36

VIVOTEK - A Leading Provider of Multimedia Communication Solutions

White balance: Adjust the value for best color temperature. ■ Auto

The Network Camera automatically adjusts the color temperature of light in response to different light sources. The white balance setting defaults to Auto and works well in most situations.

■Fixed indoor: about 2800K

■Fixed fluorescent: about 4000K

■Fixed outdoor: about 6500K

Maximum Exposure Time: 1/120 S, 1/60 S, 1/30 S, 1/15 S, and Auto.

Overlay title and time stamp on video: Select this option to place the video title and time on video streams.

Note that when the frame size is set to 176 x 144 as the right picture below, only time will be stamped on video streams.

IP7251(TCP-AV)		IP7251(TCP-AV)

IP7251 10:02:45 2008/05/02

10:02:45 2008/05/02

Image Settings

Click Image settings to open the Image Settings page.

If you see a warning message as below, click Yes and then the information bar on the top of the page to install an ActiveX® control for Intelligent Video Analysis on your computer.

36 - User's Manual

Image 36

Contents Page Table of Contents Package contents Read before usePhysical description LensDI/DO Diagram Hardware installation Hardware ResetSetup the Network Camera over the Internet Network deploymentInternet connection with static IP Set up the Network Camera through Power over Ethernet PoE Software installation RoHSAccessing the Network Camera Using web browsersPage Using Rtsp players Using 3GPP-compatible mobile devices MPEG-4Using Vivotek recording software Main Live Video Window Video title Title and time Client Settings MP4 Saving Options System SystemSystem Time DI and do Root Password SecurityAdd User Manage UserNetwork Network TypePPPoE Point-to-point over Ethernet Page Http Two way audio FTP Rtsp Streaming Page Ddns Dynamic domain name service DdnsCustomSafe100 Access list Allowed list / Denied listDelete allowed list / Delete denied list Video settings Audio and videoImage Settings Privacy mask CCD Settings Page Audio settings To enable motion detection, follow the steps below Motion detectionPercentage = 30% RS485 Settings Camera controlPreset Position Custom CommandNetwork Camera Media Settings ApplicationSnapshot20080104100341 Server Settings Page Page Event Settings Page Recording Settings RecordingPage Video content analysis Page System log Remote LogCurrent Log View parameters Maintenance RebootRestore Upload / Export Daylight Saving Time Configuration File Upgrade Firmware Page URL Commands of the Network Camera AppendixGeneral CGI URL syntax and parameters Security levelGet server parameter values Parameter pair Update Set server parameter valuesAvailable parameters on the server Valid Values DescriptionName Value Default Security Vegas, SanFrancisco, Vancouver Page None Name Value Default Security Description Name Value Default Name 5060 SIP port Capability.protocol.sip=1 External camera VGA Cmos PAL CCD Get/set Brightness Adjust brightness of image TZO Get/set Boolean Level To control Uart Null Function Bit 3 = Support tilt operation Output Parameter Value Iva indicates Intelligent Video Parameter Value Default Security Description Httpusername String64 Indicate the prefix Max size for one file in Kbytes Drive the digital output Query status of the digital input Query status of the digital output Capture single snapshotAccount management QualitySystem logs Upgrade firmware Post dataRecall capability.ptzenabled=1 System Information Value DescriptionPreset Locations capability.ptzenabled=1 IP filteringUart Http tunnel channel capability.nuart0 End parameters are specified, it will try to removeGet SDP of Streamings Open the network streamingsPage Technical Specifications SpecificationsTechnology License Notice Electromagnetic Compatibility EMC