Vivotek IP7251 manual Two way audio

Page 28

VIVOTEK - A Leading Provider of Multimedia Communication Solutions

For example, when the access name for stream 1 is set to video.mjpg:

1.Launch Mozilla Firefox or Netscape.

2.Type the URL command in the address field. Press Enter.

3.The JPEG images will be displayed in your web browser.

http://192.168.5.117/video2.mjpg

NOTE

►To utilize the HTTP authentication, make sure that your have set a password for the Network Camera first; please refer to Security on page 23 for details.

►Microsoft® Internet Explorer does not support server push technology; therefore, using http://<ip address>:<http port>/<access name for stream1 or stream2> will fail to access the Network Camera.

Two way audio

By default, the two way audio port is set to 5060. Also, it can be assigned with another port number between 1025 and 65535.

The Network Camera supports two way audio communication so that operators can transmit and receive audio simultaneously. By using the Network Camera’s built-in microphone and an external speaker, you can communicate with people around the Network Camera.

Note that as JPEG only transmits a series of JPEG images to the client, to utilize this feature, make sure the video mode is set to “MPEG-4” and the media option is set to “Video and Audio”.

28 - User's Manual

Image 28

Contents Page Table of Contents Package contents Read before usePhysical description LensDI/DO Diagram Hardware installation Hardware ResetSetup the Network Camera over the Internet Network deploymentInternet connection with static IP Set up the Network Camera through Power over Ethernet PoE Software installation RoHSAccessing the Network Camera Using web browsersPage Using Rtsp players Using 3GPP-compatible mobile devices MPEG-4Using Vivotek recording software Main Live Video Window Video title Title and time Client Settings MP4 Saving Options System SystemSystem Time DI and do Root Password SecurityAdd User Manage UserNetwork Network TypePPPoE Point-to-point over Ethernet Page Http Two way audio FTP Rtsp Streaming Page Ddns Dynamic domain name service DdnsCustomSafe100 Allowed list / Denied list Access listDelete allowed list / Delete denied list Video settings Audio and videoImage Settings Privacy mask CCD Settings Page Audio settings To enable motion detection, follow the steps below Motion detectionPercentage = 30% RS485 Settings Camera controlPreset Position Custom CommandNetwork Camera Media Settings ApplicationSnapshot20080104100341 Server Settings Page Page Event Settings Page Recording Settings RecordingPage Video content analysis Page Remote Log System logCurrent Log View parameters Reboot MaintenanceRestore Upload / Export Daylight Saving Time Configuration File Upgrade Firmware Page URL Commands of the Network Camera AppendixSecurity level General CGI URL syntax and parametersGet server parameter values Parameter pair Update Set server parameter valuesAvailable parameters on the server Valid Values DescriptionName Value Default Security Vegas, SanFrancisco, Vancouver Page None Name Value Default Security Description Name Value Default Name 5060 SIP port Capability.protocol.sip=1 External camera VGA Cmos PAL CCD Get/set Brightness Adjust brightness of image TZO Get/set Boolean Level To control Uart Null Function Bit 3 = Support tilt operation Output Parameter Value Iva indicates Intelligent Video Parameter Value Default Security Description Httpusername String64 Indicate the prefix Max size for one file in Kbytes Drive the digital output Query status of the digital input Query status of the digital output Capture single snapshotAccount management QualitySystem logs Upgrade firmware Post dataRecall capability.ptzenabled=1 System Information Value DescriptionPreset Locations capability.ptzenabled=1 IP filteringUart Http tunnel channel capability.nuart0 End parameters are specified, it will try to removeGet SDP of Streamings Open the network streamingsPage Technical Specifications SpecificationsTechnology License Notice Electromagnetic Compatibility EMC