Vivotek IP7251 manual Audio and video, Video settings

Page 35

VIVOTEK - A Leading Provider of Multimedia Communication Solutions

Audio and video

This section explains how to cofigure audio and video performances of the Network Camera. It is composed of the following two columns: Video settings and Audio settings.

Video settings

Video title: Enter a name that will be displayed on the title bar of the live video.

IP7251(TCP-AV)

Color: Select to display colorful or black/white video streams.

Power line frequency: Set the power line frequency in consistent with local utility settings to eliminate uncomfortable image flickering associated with fluorescent lights. Note that after the power line frequency is changed, it is required to disconnect and reconnect the power cord of the Network Camera in order for the new setting to take effect.

Video orientation: Flip--vertically reflect the display of the live video; Mirror--horizontally reflect the display of the live video. Select both options if the Network Camera is installed upside-down (ex. on the ceiling) to correct the image orientation.

User's Manual - 35

Image 35

Contents Page Table of Contents Read before use Package contentsLens Physical descriptionDI/DO Diagram Hardware Reset Hardware installationNetwork deployment Setup the Network Camera over the InternetInternet connection with static IP Set up the Network Camera through Power over Ethernet PoE RoHS Software installationUsing web browsers Accessing the Network CameraPage Using Rtsp players MPEG-4 Using 3GPP-compatible mobile devicesUsing Vivotek recording software Main Live Video Window Video title Title and time Client Settings MP4 Saving Options System Time SystemSystem DI and do Manage User Root PasswordSecurity Add UserNetwork Type NetworkPPPoE Point-to-point over Ethernet Page Http Two way audio FTP Rtsp Streaming Page Ddns Ddns Dynamic domain name serviceCustomSafe100 Delete allowed list / Delete denied list Access listAllowed list / Denied list Audio and video Video settingsImage Settings Privacy mask CCD Settings Page Audio settings Motion detection To enable motion detection, follow the steps belowPercentage = 30% Camera control RS485 SettingsCustom Command Preset PositionNetwork Camera Application Media SettingsSnapshot20080104100341 Server Settings Page Page Event Settings Page Recording Recording SettingsPage Video content analysis Page Current Log System logRemote Log View parameters Restore MaintenanceReboot Upload / Export Daylight Saving Time Configuration File Upgrade Firmware Page Appendix URL Commands of the Network CameraGet server parameter values General CGI URL syntax and parametersSecurity level Parameter pair Set server parameter values UpdateValid Values Description Available parameters on the serverName Value Default Security Vegas, SanFrancisco, Vancouver Page None Name Value Default Security Description Name Value Default Name 5060 SIP port Capability.protocol.sip=1 External camera VGA Cmos PAL CCD Get/set Brightness Adjust brightness of image TZO Get/set Boolean Level To control Uart Null Function Bit 3 = Support tilt operation Output Parameter Value Iva indicates Intelligent Video Parameter Value Default Security Description Httpusername String64 Indicate the prefix Max size for one file in Kbytes Drive the digital output Query status of the digital input Capture single snapshot Query status of the digital outputQuality Account managementSystem logs Post data Upgrade firmwareRecall capability.ptzenabled=1 Value Description System InformationIP filtering Preset Locations capability.ptzenabled=1End parameters are specified, it will try to remove Uart Http tunnel channel capability.nuart0Open the network streamings Get SDP of StreamingsPage Specifications Technical SpecificationsTechnology License Notice Electromagnetic Compatibility EMC