Vivotek IP7251 manual Name Value Default Security

Page 68

VIVOTEK - A Leading Provider of Multimedia Communication Solutions

…

blank	A blank string

everything inside <>	As description

NOTE: The camera should prevent to restart when parameter changed.

Group: system

	NAME		VALUE		DEFAULT		SECURITY
							(get/set)
							(get/set)

	hostname	string[40]			IP7251	1/6
					Network
					Camera

ledoff	<boolean>	0	6/6

date	<yyyy/mm/dd>,	<current	6/6
	keep,	date>
	auto

time	<hh:mm:ss>,	<current	6/6
	keep,	time>
	auto

ntp	<domain name>,	<blank>	6/6
	<ip address>,
	<blank>

timezoneindex	-480 ~ 520	320	6/6

DESCRIPTION

host name of server (Network Camera, Wireless Network Camera, Video Server,

Wireless Video Server) turn on(0) or turn off(1) all led indicators

Current date of system. Set to ‘keep’ keeping date unchanged. Set to ‘auto’ to use NTP to synchronize date.

Current time of system. Set to ‘keep’ keeping time unchanged. Set to ‘auto’ to use NTP to synchronize time.

NTP server

*do not use “skip to invoke default server” for default Indicate timezone and area

-480: GMT-12:00

Eniwetok, Kwajalein

-440: GMT-11:00 Midway

Island, Samoa

-400: GMT-10:00 Hawaii

-360: GMT-09:00 Alaska

-320: GMT-08:00 Las

68 - User's Manual

Image 68

Contents Page Table of Contents Package contents Read before usePhysical description LensDI/DO Diagram Hardware installation Hardware ResetSetup the Network Camera over the Internet Network deploymentInternet connection with static IP Set up the Network Camera through Power over Ethernet PoE Software installation RoHSAccessing the Network Camera Using web browsersPage Using Rtsp players Using 3GPP-compatible mobile devices MPEG-4Using Vivotek recording software Main Live Video Window Video title Title and time Client Settings MP4 Saving Options System Time SystemSystem DI and do Root Password SecurityAdd User Manage UserNetwork Network TypePPPoE Point-to-point over Ethernet Page Http Two way audio FTP Rtsp Streaming Page Ddns Dynamic domain name service DdnsCustomSafe100 Delete allowed list / Delete denied list Access listAllowed list / Denied list Video settings Audio and videoImage Settings Privacy mask CCD Settings Page Audio settings To enable motion detection, follow the steps below Motion detectionPercentage = 30% RS485 Settings Camera controlPreset Position Custom CommandNetwork Camera Media Settings ApplicationSnapshot20080104100341 Server Settings Page Page Event Settings Page Recording Settings RecordingPage Video content analysis Page Current Log System logRemote Log View parameters Restore MaintenanceReboot Upload / Export Daylight Saving Time Configuration File Upgrade Firmware Page URL Commands of the Network Camera AppendixGet server parameter values General CGI URL syntax and parametersSecurity level Parameter pair Update Set server parameter valuesAvailable parameters on the server Valid Values DescriptionName Value Default Security Vegas, SanFrancisco, Vancouver Page None Name Value Default Security Description Name Value Default Name 5060 SIP port Capability.protocol.sip=1 External camera VGA Cmos PAL CCD Get/set Brightness Adjust brightness of image TZO Get/set Boolean Level To control Uart Null Function Bit 3 = Support tilt operation Output Parameter Value Iva indicates Intelligent Video Parameter Value Default Security Description Httpusername String64 Indicate the prefix Max size for one file in Kbytes Drive the digital output Query status of the digital input Query status of the digital output Capture single snapshotAccount management QualitySystem logs Upgrade firmware Post dataRecall capability.ptzenabled=1 System Information Value DescriptionPreset Locations capability.ptzenabled=1 IP filteringUart Http tunnel channel capability.nuart0 End parameters are specified, it will try to removeGet SDP of Streamings Open the network streamingsPage Technical Specifications SpecificationsTechnology License Notice Electromagnetic Compatibility EMC