Vivotek IP7251 manual

Page 56

VIVOTEK - A Leading Provider of Multimedia Communication Solutions

time. It will trigger the alarm once the dwelling time of the object is longer than the given time.

■ Camera tampering detection: Select this option to detect camera tampering.

Detection region: Draw a detection region.

 

 

 

 

■ To draw a rectangle region, click on the rectangle button

to entering the drawing mode. The button

will becomes

and you can click and drag to draw a rectangle on the video area as the left diagram

below.

 

 

■ To draw a polygon region, click on the polygon button

to entering the drawing mode. The button

will becomes

and you and click several points on the video area to link a polygon region. Note that

the maximum number of points of the polynomial should be 10.

Note that you can only draw either a rectangle region or a polygon region. The buttons will turn to which can not be configured.

You can click Delete to erase the detection region. When completed, select Enable this trigger. Click Save to take effect and then click Close to quit this page.

The status of trigger will turn to “ON“ on the Video content analysis page as below.

56 - User's Manual

Page 55 Page 57
Image 56
Page 55 Page 57
Contents Page Table of Contents Package contents Read before usePhysical description LensDI/DO Diagram Hardware installation Hardware ResetSetup the Network Camera over the Internet Network deploymentInternet connection with static IP Set up the Network Camera through Power over Ethernet PoE Software installation RoHSAccessing the Network Camera Using web browsersPage Using Rtsp players Using 3GPP-compatible mobile devices MPEG-4Using Vivotek recording software Main Live Video Window Video title Title and time Client Settings MP4 Saving Options System Time SystemSystem DI and do Root Password SecurityAdd User Manage UserNetwork Network TypePPPoE Point-to-point over Ethernet Page Http Two way audio FTP Rtsp Streaming Page Ddns Dynamic domain name service DdnsCustomSafe100 Delete allowed list / Delete denied list Access listAllowed list / Denied list Video settings Audio and videoImage Settings Privacy mask CCD Settings Page Audio settings To enable motion detection, follow the steps below Motion detectionPercentage = 30% RS485 Settings Camera controlPreset Position Custom CommandNetwork Camera Media Settings ApplicationSnapshot20080104100341 Server Settings Page Page Event Settings Page Recording Settings RecordingPage Video content analysis Page Current Log System logRemote Log View parameters Restore MaintenanceReboot Upload / Export Daylight Saving Time Configuration File Upgrade Firmware Page URL Commands of the Network Camera AppendixGet server parameter values General CGI URL syntax and parametersSecurity level Parameter pair Update Set server parameter valuesAvailable parameters on the server Valid Values DescriptionName Value Default Security Vegas, SanFrancisco, Vancouver Page None Name Value Default Security Description Name Value Default Name 5060 SIP port Capability.protocol.sip=1 External camera VGA Cmos PAL CCD Get/set Brightness Adjust brightness of image TZO Get/set Boolean Level To control Uart Null Function Bit 3 = Support tilt operation Output Parameter Value Iva indicates Intelligent Video Parameter Value Default Security Description Httpusername String64 Indicate the prefix Max size for one file in Kbytes Drive the digital output Query status of the digital input Query status of the digital output Capture single snapshotAccount management QualitySystem logs Upgrade firmware Post dataRecall capability.ptzenabled=1 System Information Value DescriptionPreset Locations capability.ptzenabled=1 IP filteringUart Http tunnel channel capability.nuart0 End parameters are specified, it will try to removeGet SDP of Streamings Open the network streamingsPage Technical Specifications SpecificationsTechnology License Notice Electromagnetic Compatibility EMC
Top Page Image Contents