Vivotek IP7251 manual

Page 54

VIVOTEK - A Leading Provider of Multimedia Communication Solutions

Destination: Specify a storage destination for the recorded video files. Note that the destination field is empty by default. Please go to Configuration > Application > Server Settings to set a Network storage server; please refer to Server Settings on page 48.

Max. recording capacity: Please note that when the maximum capacity is reached, the oldest file will be overwritten by the latest one.

File size for each recording: Specify the file size for each recording media.

File name prefix: Enter the text that will be put in front of the file name.

When completed, select Enable this recording. Click Save to take effect and then click Close to quit this page. The new recording name will appear in the recording drop-down list on the recording page. To remove a recording setting from the list, select a recording name from the drop-down list then and click Delete.

54 - User's Manual

Image 54

Contents Page Table of Contents Package contents Read before usePhysical description LensDI/DO Diagram Hardware installation Hardware ResetSetup the Network Camera over the Internet Network deploymentInternet connection with static IP Set up the Network Camera through Power over Ethernet PoE Software installation RoHSAccessing the Network Camera Using web browsersPage Using Rtsp players Using 3GPP-compatible mobile devices MPEG-4Using Vivotek recording software Main Live Video Window Video title Title and time Client Settings MP4 Saving Options System SystemSystem Time DI and do Add User Root PasswordSecurity Manage UserNetwork Network TypePPPoE Point-to-point over Ethernet Page Http Two way audio FTP Rtsp Streaming Page Ddns Dynamic domain name service DdnsCustomSafe100 Access list Allowed list / Denied listDelete allowed list / Delete denied list Video settings Audio and videoImage Settings Privacy mask CCD Settings Page Audio settings To enable motion detection, follow the steps below Motion detectionPercentage = 30% RS485 Settings Camera controlPreset Position Custom CommandNetwork Camera Media Settings ApplicationSnapshot20080104100341 Server Settings Page Page Event Settings Page Recording Settings RecordingPage Video content analysis Page System log Remote LogCurrent Log View parameters Maintenance RebootRestore Upload / Export Daylight Saving Time Configuration File Upgrade Firmware Page URL Commands of the Network Camera AppendixGeneral CGI URL syntax and parameters Security levelGet server parameter values Parameter pair Update Set server parameter valuesAvailable parameters on the server Valid Values DescriptionName Value Default Security Vegas, SanFrancisco, Vancouver Page None Name Value Default Security Description Name Value Default Name 5060 SIP port Capability.protocol.sip=1 External camera VGA Cmos PAL CCD Get/set Brightness Adjust brightness of image TZO Get/set Boolean Level To control Uart Null Function Bit 3 = Support tilt operation Output Parameter Value Iva indicates Intelligent Video Parameter Value Default Security Description Httpusername String64 Indicate the prefix Max size for one file in Kbytes Drive the digital output Query status of the digital input Query status of the digital output Capture single snapshotAccount management QualitySystem logs Upgrade firmware Post dataRecall capability.ptzenabled=1 System Information Value DescriptionPreset Locations capability.ptzenabled=1 IP filteringUart Http tunnel channel capability.nuart0 End parameters are specified, it will try to removeGet SDP of Streamings Open the network streamingsPage Technical Specifications SpecificationsTechnology License Notice Electromagnetic Compatibility EMC