Dell 4J1412 owner manual Print is Smudged

w w w . d e l l . c o m s u p p o r t . d e l l . c o m

PRINTING STOPS DURING MID-PRINT (PAPER STOPS FEEDING, AND ERROR INDICATOR LIGHT IS ON)

NOTE: Use only Dell photo paper from a Dell Photo Print Pack for your printer. Do not use inkjet paper or any other photo paper.

•Check the photo paper:

1 Remove the paper tray.

2 Check the paper slot on the back of the printer. 3 Remove loose paper from the printer.

4 Inspect the paper supply: make sure removable tabs have not been detached from the photo paper. Reload with new photo paper if necessary.

5 Carefully “fan” the photo paper to keep the sheets from sticking together.

6 Reload the paper tray using no more than 20 sheets.

7 Re-install the paper tray, then press to resume printing.

• Clean the paper feed roller (page 30).

PRINT IS SMUDGED

Fingerprints may be on glossy side of paper. Handle paper by the edges or by the removable tabs.

PRINT IS SPOTTED

Check to see if the photo paper is dirty, and use a dry, lint-free cloth to wipe clean. For excessive dirt or debris, thoroughly clean the paper tray, and load new photo paper (page 15).

NOTE: When storing photo paper, remove and close the paper tray and close the paper tray door on the printer. These steps keep dust and debris from collecting on the photo paper or inside the printer.

PRINT IS TOO LIGHT

NOTE: Use only Dell photo paper from a Dell Photo Print Pack for your printer. Do not use inkjet paper or any other photo paper.

•Photo brightness can be changed by selecting Photo Quality--> Photo Brightness (page 17) or --> Automatic photo brightness.

•Make sure the photo paper is loaded with the Dell logo facing down. Reload if necessary (page 15).

•Try re-taking the photo with the flash off. See your camera user’s guide for details.

•Adjust the exposure compensation on your camera (if available), and try re-taking the photo. See your camera user’s guide for details.

•Edit the photo using Dell Photo Imaging software on your computer. See the Photo Imaging software Help for details.

34

Troubleshooting