Cannon QL Film Loading, 2.Insert cartridge, 1.Open the back cover, 5.Close the back cover, 3.Set film tip to the red mark, When the back cover is half closed

Page 15

Film Loading 

Canon PELLIX QL accepts any standard 35mm film in cartridge for daylight loading. 

è

When loading a new film, avoid direct sunlight. 4 When repacking a long-wound film for darkroom loading into the ordinary 

cartridge, trim the end of the leader part in between the perforations. 

1.  Open the back cover. 

    Raise the back cover lock, make a half turn to the left, and the cover will rise. Open the back cover fully. When the back cover is 

opened, the QL cover also opens simultaneously and is ready for loading the film. 

è

 The QL cover automatically opens and closes together with the opening and closing of the back cover. Do not touch the QL cover.

www.4.butkus.org

 

2.  Insert cartridge. 

    Raise the rewinding knob all the way. When the cartridge has been inserted, push the knob back to its former position again. Push the 

fork into the axis of the cartridge. In case the knob does not fully return, it can be easily put into proper position by turning it slightly to 

the left or right. 

3.  Set film tip to the red mark. 

     Face the cartridge as shown in the picture and hold the film down with the left hand so that it does not rise. 

 

4.  When the back cover is half closed, the QL cover presses down on the film. Check through the sprocket window whether the film 

has been engaged correctly onto the gear. 

5.  Close the back cover. 

     Press down to prevent the cover from rising, then turn the back cover lock clockwise to close. 

www.butkus.org/chinon

Image 15
Contents To main Chinon/Ricoh manual site Before UsingCanon Pellix Camera ManualTable of contents Technical Data Technical Data — page 4 Mercury Battery Loading : Battery CheckFilm Winding : Safety Device for ShutterFilm Counter Attaching the Cable ReleaseShutter and Aperture Adjustment : Shutter Speed DialLens Aperture Lens with Manual Aperture Ring Pre-Set Aperture and Checking of Depth-of-FieldRelation Between the Pellicle Mirror, CdS, Diaphragm and Shutter Lens with A-M RingFilm Speed Setting How to Use Built-in Exposure Meter :Exposure Setting 1--Shutter Speed Priority Method : How to Measure the Average BrightnessCdS Actuating Lever Exposure Setting 2--F Stop Priority Method : Focusing : Composition and Viewfinder Holding the Camera :Holding the Camera : — page 14 Film Loading : Setting the Film Speed Checking Correct Film LoadingFilm Rewinding : Photography Using Self-timer and Eyepiece Shutter : Eyepiece ShutterFlash Synchronization : Infrared Index " R " Uses of Lenses :Changing Lenses Distance ScaleDepth of field Scale Lens Mount (FL and R Series Lenses)Film Plane Mark Double Exposure : Filters :Storage of Camera Cleaning of the CameraCleaning the Lens Proper Care of the Canon PELLIX QL :New "Compact Series" Lenses Interchangeable Lenses and Accessories :Canon Interchangeable Lenses Canon Zoom LensesAccessories Technical DataCanon Booster Technical Data — page 24