Cannon QL Photography Using Self-timerand Eyepiece Shutter, Eyepiece Shutter, Flash Synchronization

Page 17

become impossible. If this happens, open the back cover in a completely dark room.

Photography Using Self-timer and Eyepiece Shutter

 

Wind the shutter and close the eyepiece shutter. Turn the self-timer lever in the direction of the arrow and press the shutter button. The 

shutter will be actuated approximately 10 seconds later.

 

è

 Be sure to wind the self-timer completely.

 

è

 Be sure to wind the shutter. If this is neglected and only the self-timer is wound and the shutter button pressed, the self-timer will act 

but the shutter will not be actuated.

 

è

 The self-timer lever can be used as a CdS actuating lever as soon as it returns to its original position. When taking shots with the eye 

off the eyepiece, such as when using the self-timer or cable release, always be sure to close the eyepiece shutter. 

Eyepiece Shutter

 

Since the Canon PELLIX QL incorporates the mirror, the light rays may cause ghosts on the film plane if the viewfinder eyepiece 

receives strong light.

www.4.butkus.org

 

è

 For closing the eyepiece shutter, turn the eyepiece shutter ring to the left and set the index mark to [ ]. 

Flash Synchronization

 By connecting the cord of the flash unit or speedlight to the flash socket, it is 

possible to synchronize the following shutter speeds. 

When taking pictures with flash, light volume adjustment is required because the 

Canon PELLIX QL uses a stationary mirror. Obtain F stop by guide number and 

further open aperture by one-half.

 

è

 A lens hood is necessary when taking flash pictures.

 

  

www.butkus.org/chinon

Image 17
Contents Canon Pellix Before UsingCamera Manual To main Chinon/Ricoh manual siteTable of contents Technical Data Technical Data — page 4 Mercury Battery Loading : Battery CheckFilm Counter Safety Device for ShutterAttaching the Cable Release Film Winding :Lens Aperture Shutter and Aperture Adjustment :Shutter Speed Dial Relation Between the Pellicle Mirror, CdS, Diaphragm and Shutter Pre-Set Aperture and Checking of Depth-of-FieldLens with A-M Ring Lens with Manual Aperture RingFilm Speed Setting How to Use Built-in Exposure Meter :CdS Actuating Lever Exposure Setting 1--Shutter Speed Priority Method :How to Measure the Average Brightness Exposure Setting 2--F Stop Priority Method : Focusing : Composition and Viewfinder Holding the Camera :Holding the Camera : — page 14 Film Loading : Film Rewinding : Setting the Film SpeedChecking Correct Film Loading Flash Synchronization : Photography Using Self-timer and Eyepiece Shutter :Eyepiece Shutter Changing Lenses Uses of Lenses :Distance Scale Infrared Index " R "Film Plane Mark Depth of field ScaleLens Mount (FL and R Series Lenses) Double Exposure : Filters :Cleaning the Lens Cleaning of the CameraProper Care of the Canon PELLIX QL : Storage of CameraCanon Interchangeable Lenses Interchangeable Lenses and Accessories :Canon Zoom Lenses New "Compact Series" LensesCanon Booster AccessoriesTechnical Data Technical Data — page 24