Cannon QL Film Rewinding, 2.Rewind with crank, 3.Open the back cover, Setting the Film Speed, 4.Remove the cartridge, 6.Make three blank shots

Page 16

Fold down the rewinding crank. 

è

 If the film is sagging, the cartridge will rise and the back cover will not close. 

6.  Make three blank shots. 

    Leave the lens cap on and advance the film three times, each time releasing the shutter. The film counter will advance from the "S" 

mark to "O". With one more advance, the camera will be ready for the first shot. 

Setting the Film Speed

 When loading the film, be sure to set the film speed in the window of the shutter dial. Refer to page 16 for setting the film speed. 

Checking Correct Film Loading

 

The film is properly loaded and transported if the rewind knob rotates when the film advance lever is wound. If the rewind knob does 

not rotate, it means the film was not loaded properly. If such is the case, take out the film, as plus bated on page 28, and reload the film. 

Film Rewinding

 

Since no further winding is possible when the film has reached the end, rewind the film immediately into the cartridge. As the exposed 

film is naked within the camera, the entire roll will be exposed and ruined if the cover is opened before rewinding. 

1.  Press in the rewinding button. 

2.  Rewind with crank. 

    Raise the rewind knob, turn the crank in the direction of the arrow, and return the film into the cartridge. When the rewinding button 

stops revolving and rewinding resistance becomes light, immediately stop rewinding.

 

3.  Open the back cover. 

4.  Remove the cartridge. 

    Raise the rewind knob completely and remove the cartridge.

 

è

 Once the rewinding button has been pressed, the finger may be removed. The button will return automatically when the lever is 

wound.

 

è

 If winding is continued after the film is at its end, the film will come loose from the cartridge spool or tear and rewinding will 

Image 16
Contents Before Using Canon PellixCamera Manual To main Chinon/Ricoh manual siteTable of contents Technical Data Technical Data — page 4 Battery Check Mercury Battery Loading :Safety Device for Shutter Film CounterAttaching the Cable Release Film Winding :Shutter Speed Dial Shutter and Aperture Adjustment :Lens Aperture Pre-Set Aperture and Checking of Depth-of-Field Relation Between the Pellicle Mirror, CdS, Diaphragm and ShutterLens with A-M Ring Lens with Manual Aperture RingHow to Use Built-in Exposure Meter : Film Speed SettingHow to Measure the Average Brightness Exposure Setting 1--Shutter Speed Priority Method :CdS Actuating Lever Exposure Setting 2--F Stop Priority Method : Focusing : Holding the Camera : Composition and ViewfinderHolding the Camera : — page 14 Film Loading : Checking Correct Film Loading Setting the Film SpeedFilm Rewinding : Eyepiece Shutter Photography Using Self-timer and Eyepiece Shutter :Flash Synchronization : Uses of Lenses : Changing LensesDistance Scale Infrared Index " R "Lens Mount (FL and R Series Lenses) Depth of field ScaleFilm Plane Mark Filters : Double Exposure :Cleaning of the Camera Cleaning the LensProper Care of the Canon PELLIX QL : Storage of CameraInterchangeable Lenses and Accessories : Canon Interchangeable LensesCanon Zoom Lenses New "Compact Series" LensesTechnical Data AccessoriesCanon Booster Technical Data — page 24