Cannon QL Shutter and Aperture Adjustment, Shutter Speed Dial, Lens Aperture

Page 7

 

Shutter and Aperture Adjustment

 

The shutter and aperture adjust the exposure with the shutter adjusting the exposure time and the aperture ad lusting the amount of light. 

The Canon PELLIX QL uses the zero-method coupled meter, and it is very simple to get the proper exposure. 

Shutter Speed Dial 

By revolving the dial, it is possible to adjust the speed by turning it to the necessary index number. The index on the dial shows the 

denominators of 1/1000 sec., 1/15 sec., etc.

 

è

 The shutter speed dial does not revolve between the indexes "X" and "B".

 

è

 Set the index at the position where the click stop catches.

 

è

 "B" means bulb exposure. The shutter, which remains open during the pressing of the shutter button, is employed when making 

exposures of more than one second.

 

In case of " B" index, adjust it to the white dot just below the " B" index.

 

è

 When it is necessary to make a n exposure over an extended time, first set it at " B ". Keep the shutter button pressed, turn the time 

lock lever to indicator " L". In this case, even if the finger is removed, the exposure continues. When the lever is returned to "A", the 

shutter closes.

 

è

 Time exposure is possible also by using the lock-attached cable release.

 

è

 The "X" index is used for synchronizing a speedlight. Although the shutter speed at "X" is 1/60 sec., actually it is equivalent to a 

very short exposure during the flash time of the speed light.

 

Lens Aperture 

The adjustment of the quantity of light and depth-of-field are made by turning the pre-set aperture ring to adjust the desired F stop to the 

index.

 

è

 As the numerical value of the F stop gets larger, the amount of light reaching the film becomes correspondingly less. For each F stop 

the light is reduced one-half. Accordingly, when the aperture is increased by one index point, the exposure is doubled, and when it is 

increased by two index points the exposure is quadrupled.

 

www.butkus.org/chinon

Image 7
Contents To main Chinon/Ricoh manual site Before UsingCanon Pellix Camera ManualTable of contents Technical Data Technical Data — page 4 Mercury Battery Loading : Battery CheckFilm Winding : Safety Device for ShutterFilm Counter Attaching the Cable ReleaseShutter Speed Dial Shutter and Aperture Adjustment :Lens Aperture Lens with Manual Aperture Ring Pre-Set Aperture and Checking of Depth-of-FieldRelation Between the Pellicle Mirror, CdS, Diaphragm and Shutter Lens with A-M RingFilm Speed Setting How to Use Built-in Exposure Meter :How to Measure the Average Brightness Exposure Setting 1--Shutter Speed Priority Method :CdS Actuating Lever Exposure Setting 2--F Stop Priority Method : Focusing : Composition and Viewfinder Holding the Camera :Holding the Camera : — page 14 Film Loading : Checking Correct Film Loading Setting the Film SpeedFilm Rewinding : Eyepiece Shutter Photography Using Self-timer and Eyepiece Shutter :Flash Synchronization : Infrared Index " R " Uses of Lenses :Changing Lenses Distance ScaleLens Mount (FL and R Series Lenses) Depth of field ScaleFilm Plane Mark Double Exposure : Filters :Storage of Camera Cleaning of the CameraCleaning the Lens Proper Care of the Canon PELLIX QL :New "Compact Series" Lenses Interchangeable Lenses and Accessories :Canon Interchangeable Lenses Canon Zoom LensesTechnical Data AccessoriesCanon Booster Technical Data — page 24