Cannon QL Film Plane Mark, Depth of field Scale, Lens Mount (FL and R Series Lenses)

Page 19

Film Plane Mark

 

The lens distance index is scaled by measuring the distance from the film position. Thus, 

in case the focusing is done by actual measurement, measure from the film plane mark 

and transfer this distance to the lens distance index.

www.4.butkus.org

 

è

 Traces of water bubbles cannot be entirely removed from glass used for high quality 

lenses because of the manufacturing process. Lens bubbles will not at all affect the 

sharpness of the picture.

 

Depth of field Scale

 

The depth-of-field scale indicates the range of subjects which will be in sharp focus on the film. This range will vary with the following 

factors: The depth-of-field will be deeper the smaller the lens aperture, the further the distance of the subject, and/or the shorter the lens 

focal length. The depth-of-field will be shallower the larger the lens aperture, the nearer the distance of the subject, and/or the longer the 

lens focal length.

 

Depth-of-field 2.3 m 4.3 m F 8 50 mm Focused at 3 m

 

For example, if the lens is 50mm and the subject has been focused at a distance of 3m, with an F8 aperture, the depth-of-field would be 

from approximately 2.3m to 4.3m as indicated on both sides of the distance index. 

Depth-of field 1.9 m-7.6 m F 16 50 mm Focused at 3 m

 

Similarly, if the aperture is F16, the picture will be sharp from about l.9m to 7.6m. This range will vary with the F stop selected.

 

è

 FL series of the Canon lenses have a feature which lets you see the actual sharpness through the viewfinder by turning the manual 

aperture ring. 

Lens Mount (FL and R Series Lenses)

 

As the lens mount for the Canon PELLIX QL is the same as for Canon PELLiX, FT QL, FX, and FP, it is possible to use all FL series 

lenses except the l9mm F3.5 lens. The l9mm F3.5 lens cannot be attached because the PELLIX QL uses stationary type panicle mirror. 

Use FL l9mm F3.5R for exclusive use with the Canon PELLIX QL instead.

 

è

 It is possible to attach and use all the R series lenses for CANONFLEX use. However, as the automatic aperture mechanism differs, 

www.butkus.org/chinon

Image 19
Contents To main Chinon/Ricoh manual site Before UsingCanon Pellix Camera ManualTable of contents Technical Data Technical Data — page 4 Mercury Battery Loading : Battery CheckFilm Winding : Safety Device for ShutterFilm Counter Attaching the Cable ReleaseShutter Speed Dial Shutter and Aperture Adjustment :Lens Aperture Lens with Manual Aperture Ring Pre-Set Aperture and Checking of Depth-of-FieldRelation Between the Pellicle Mirror, CdS, Diaphragm and Shutter Lens with A-M RingFilm Speed Setting How to Use Built-in Exposure Meter :How to Measure the Average Brightness Exposure Setting 1--Shutter Speed Priority Method :CdS Actuating Lever Exposure Setting 2--F Stop Priority Method : Focusing : Composition and Viewfinder Holding the Camera :Holding the Camera : — page 14 Film Loading : Checking Correct Film Loading Setting the Film SpeedFilm Rewinding : Eyepiece Shutter Photography Using Self-timer and Eyepiece Shutter :Flash Synchronization : Infrared Index " R " Uses of Lenses :Changing Lenses Distance ScaleLens Mount (FL and R Series Lenses) Depth of field ScaleFilm Plane Mark Double Exposure : Filters :Storage of Camera Cleaning of the CameraCleaning the Lens Proper Care of the Canon PELLIX QL :New "Compact Series" Lenses Interchangeable Lenses and Accessories :Canon Interchangeable Lenses Canon Zoom LensesTechnical Data AccessoriesCanon Booster Technical Data — page 24