Cannon QL Film Winding, Film Counter, Safety Device for Shutter, Attaching the Cable Release

Page 6

Film Winding

 

1.    The turning of the film advance lever cocks the shutter, film winding and aperture charging in one motion.

 

2.    When the shutter button is pressed, the diaphragm simultaneously closes down to the pre-selected F stop and the shutter operates.

www.4.butkus.org

 

Immediately after the shutter operation, the advance lever is again in ready position.

 

è

 Be sure that the safety lock lever is set at "A".

 

è

 The winding may be done by moving the lever with several short strokes. 

è

 After loading the film, make another wind, since there is the possibility of the very first winding not catching.

 

è

 Unless the winding is completed, the shutter will not be actuated, even though the shutter button is pressed. In such a case, check the 

winding once more. 

Film Counter

 

Each winding of film will advance the number of the film counter, indicating the number of pictures taken. When the back cover is 

opened, the indicator automatically returns to starting position " S ". 

Safety Device for Shutter

 

When the safety lock lever around the shutter button is turned to " L" position, the shutter is locked and will not move. This device may 

be used when the camera is carried in a wound condition. 

Attaching the Cable Release

 

A cable release can be attached to the shutter button. Even if the safety lock lever is at " L" position, the shutter will operate by using the 

release. 

When using the cable release, be sure to close the eyepiece shutter before shooting. Refer to instructions on page 29. 

 

Image 6
Contents Camera Manual Before UsingCanon Pellix To main Chinon/Ricoh manual siteTable of contents Technical Data Technical Data — page 4 Battery Check Mercury Battery Loading :Attaching the Cable Release Safety Device for ShutterFilm Counter Film Winding :Shutter and Aperture Adjustment : Shutter Speed DialLens Aperture Lens with A-M Ring Pre-Set Aperture and Checking of Depth-of-FieldRelation Between the Pellicle Mirror, CdS, Diaphragm and Shutter Lens with Manual Aperture RingHow to Use Built-in Exposure Meter : Film Speed SettingExposure Setting 1--Shutter Speed Priority Method : How to Measure the Average BrightnessCdS Actuating Lever Exposure Setting 2--F Stop Priority Method : Focusing : Holding the Camera : Composition and ViewfinderHolding the Camera : — page 14 Film Loading : Setting the Film Speed Checking Correct Film LoadingFilm Rewinding : Photography Using Self-timer and Eyepiece Shutter : Eyepiece ShutterFlash Synchronization : Distance Scale Uses of Lenses :Changing Lenses Infrared Index " R "Depth of field Scale Lens Mount (FL and R Series Lenses)Film Plane Mark Filters : Double Exposure :Proper Care of the Canon PELLIX QL : Cleaning of the CameraCleaning the Lens Storage of CameraCanon Zoom Lenses Interchangeable Lenses and Accessories :Canon Interchangeable Lenses New "Compact Series" LensesAccessories Technical DataCanon Booster Technical Data — page 24