JVC TK-C1481 manual Shutter, ExDR, Speed

Item		Functions and set values	Initial value
SHUTTER	This sets the electronic shutter as well as the ExDR (Extended		NORMAL
(ExDR)	Dynamic Range).
	The use of an electronic shutter function enables shooting
	with proper brightness, as more brightness results in higher
	shutter speed.
	The ExDR function allows even the shooting of a subject
	having different luminous flux density by composing a picture
	shot at 1/100 (1/120) sec. shutter speed with a picture shot
	by a high-speed shutter. ( ): TK-C1480U
	NORMAL: This fixes the shutter speed to 1/50 (1/60).
		The ExDR does not function.
	MANUAL: This sets the shutter speed by the item
		SHUTTER SPEED on the SHUTTER screen.
		The ExDR does not function.
		When SENSE UP is functioning, MANUAL
		cannot be selected. (Not displayed on MENU)
	AUTO:	This automatically switches the shutter speed
		according to brightness.
		The ExDR does not function.
		The item FAST LIMIT on the SHUTTER (ExDR)
		screen sets a maximum shutter speed value.
	M.ExDR:	This is used when shooting a subject with
		difference in a luminous flux density in the screen
		under a fixed illumination condition, and so on.
		During ExDR mode, the item M.ExDR.SPEED on
		the SHUTTER (ExDR) screen sets the composing
		high shutter speed. It is possible to set only when
		the items BLC and SENSE UP are OFF. What’s
		more, the ExDR LEVEL sets the signal level of
		the composing high-speed shutter.
	A.ExDR:	This is used when the subjects having different
		luminous flux densities are continuously used
		night and day in the situation where both indoor
		and outdoor subjects are mixed in existence, and
		so forth. During ExDR mode, the composing
		shutter speed automatically varies according to
		the contrast of a subject. This is set when shooting
		the subject with changing brightness.
		This can be set only when the item BLC is OFF.
		What’s more, the ExDR LEVEL sets the signal
		level of the composing high-speed shutter.

MEMO

•Do not set to A.ExDR when using a manual lens.

•When M.ExDR mode or A.ExDr mode is used, the border between a bright part and a dark part can be coloured (cyan, orange, etc.), but this is not a malfunction.

*When the SHUTTER (ExDR) item is set to NORMAL, the following items (SHUTTER SPEED, FAST LIMIT, ExDR LEVEL, and M.ExDR SPEED) cannot be changed.

SHUTTER	This sets a shutter speed when MANUAL is set.		1/120
SPEED	The AUTO, M. ExDR, A. ExDR set value is displayed as		(1/100)
	“- - -” and cannot be changed
	[Set values: 1/120 (1/100), 1/250, 1/500, 1/1000, 1/2000,
	1/4000, and 1/10000]	( ):TK-C1480U

E-27