JVC TK-C1481 manual Communication Screen, Factory Settings Screen

COMMUNICATION Screen

Settings are made for the control signal-connecting terminals on the back. If the setting is changed, be absolutely sure to switch on the power again.

Item	Functions and set values	Initial value
STYLE	This sets a communication system according to the	P TO P
	system used.
	P TO P (Point to point)
	This is set when a remote control unit controls a camera.
	M.DROP (Multi-drop)
	This is set when a remote control unit controls a plural
	number of cameras.
MACHINE ID	This is set when the STYLE item is set to M.DROP. This	– – –
	is the number that identifies individual cameras in a group.
	No proper function can be realized if an ID number is
	repeated within a system.
	A combined use with the RM-P2580 necessitates the
	setting together with the video input number of the RM-
	P2580.
	If the item STYLE is set to P TO P, “- - -” will appear, and
	settings cannot be changed.
	[Set values: 1 to 99]

FACTORY SETTINGS Screen

Set values are returned to initial values.

Item		Functions and set values	Initial value
FACTORY	The values set on the menu are returned to initial values.		–
SETTINGS	CANCEL	: No return to the initial value.
	CLEAR	: Returns set values except titles to the
	(WITHOUT TITLE)	initial value.
	CLEAR (ALL)	: Returns all set values including titles
		to the initial value.
	Select respective set value and press the SET button.
	Then, “DATA CLEARED” will appear for about 3 seconds.
	Be sure not to switch off the power while the display is
	still on.
	MEMO
	However, when making settings by means of transmitted
	commands, the contents of the COMMUNICATION menu
	do not return to the factory settings.

E-33