JVC TK-C1481 manual Area Edit, Alarm Time

MENU SETTING

MOTION DETECT Screen(Continued)

Item	Functions and set values	Initial value
LEVEL	This sets the level that detects motion.	NORMAL
	If the item MODE is set to OFF, “- - -” will appear, and
	settings cannot be changed.
	To function with large signal level change…decrease the
	value
	To function with small signal level change…increase the
	value
	[Set values: –5 to NORMAL to 5]
AREA EDIT	This sets the range in which the motion detecting function	–
	works.
	( Page 37)
ALARM TIME	This sets the output time of the alarm signal output of	10s
	AUX terminal as well as “ALARM” display on the screen
	when motion is detected.
	If the item MODE is set to OFF, “- - -” will appear, and
	settings cannot be changed.
	[Set values: OFF, 5s, 6s, 7s, 8s, 9s, 10s, 15s, 20s, 30s,
	1min]
	MEMO
	When the MODE item is set to OFF, only the alarm signal
	of the AUX terminal is output, and “ALARM” is not
	displayed on the screen.
DEMONSTRATION	This is used when checking and confirming the set motion	–
	detecting function. The detection area is shown in gray.
	( Page 37)

E-32