JVC TK-C1481 manual Mode Select Screen, Motion Detect Screen

MODE SELECT Screen

Titles, image reversion, etc., are set.

Item				Functions and set values		Initial value
CAMERA	Bring up the CAMERA TITLE, EDIT screen.					–
TITLE EDIT	( Page 36)
REVERSE	Settings are executed for image reversion.					OFF
MODE	OFF: Image does not reverse.
	R-L: Left and right of the image are reversed.
	U-D: Up and down of the image are reversed.
	ALL: Up and down and left and right of the image are
			reversed.
ALM.TITLE	Set the size of the characters displayed in the case of					DOUBLE
SIZE	alarms.
				A L A R M	A L A R M
				NORMAL	DOUBLE
ALARM	This sets the colour of an alarm title.					WHITE
COLOUR	[Set values: WHITE, YELLOW, CYAN, GREEN]
D.ZOOM	This function sets the maximum zoom ratio of the					x2
MAX	electronic zooming.
	[Set values: x1, x2, x4, x6, x8, x10]
		MEMO
	• The electronic zoom function can only be used by the
	communication command of exclusive controllers (RM-
	P2580, etc.).
	• Note Picture quality deteriorates under electronic
	zooming as it is accompanied by digital image
	processing.
	• When the electronic zoom magnification ratio is
	increased, there may be blurring in the upper center left
	of the screen. This is a characteristic of the main unit
	and is not a malfunction.

MOTION DETECT Screen

Settings are executed about the motion detecting function that emits alarm signals when there exists any motion in the image. Alarm signals are output from the auxiliary terminals on the back.

Item		Functions and set values	Initial value
MODE	This sets ON/OFF of motion detecting function.		OFF
	OFF:	Motion detecting function does not work.
	ON:	Motion detecting function works.

E-31