JVC KY-F1030 manual White Balance screen, Process screen

5. Menu screen settings (continued)

WHITE BALANCE screen
[ ] indicates the factory setting
Item	Set Value	Contents

PROCESS screen
[ ] indicates the factory setting
Item	Set Value	Contents

COLOR

TEMP

WHITE

BALANCE

LEVEL (R) When “AUTO” is selected.

[3200K] 5600K

[AUTO] MANUAL PRESET

–8

–7

•

[NORMAL] • 8

Used to set the standard color temperature of the white balance.
3200K:	For use under low color temperature illumination,
5600K:	such as halogen lamps, etc.
	For use under high color temperature illumination,
	such as sunlight, etc.
Used to set the white balance mode.
AUTO:	Select this setting when white balance adjustment
	should be operating. ( page E23 White balance
	adjustment)
	Fine adjustment of the white accomplished by the
	white balance can be made using LEVEL (R) and
MANUAL:	LEVEL (B).
	The white balance can be changed using LEVEL
PRESET:	(R) and LEVEL (B).
	The white balance is fixed at the setting made for
	the COLOR TEMP item.
The red color in the white balance can be adjusted when [WHITE
BAL] is set to “AUTO “or “MANUAL”.
Increasing the value:		Red tint of screen becomes stronger
Decreasing the value:		Red tint of screen becomes weaker

DETAIL	[ON]	Used to set whether to emphasize details (contours).
	OFF	ON:	Detail emphasis is performed.
		OFF:	Detail emphasis is not performed.
LEVEL	–7	When [DETAIL] is set to “ON”, the emphasis level of the
When “ON” is	–6	detail is adjusted.
selected	•	Increasing the value:		Sharpens details
	[NORMAL]	Decreasing the value:		Softens details
	•
	7
NOISE SUP.	[OFF]	Reduces noise in the video signal.
When “ON” is	LOW	OFF:		Noise reduction is not performed.
selected	MIDDLE	LOW, MIDDLE, HIGH: Noise reduction is performed.
	HIGH	The reduction rate increases in the order of LOW ➝
		MIDDLE ➝ HIGH.
		MEMO

Note that when the noise reduction is increased, de-

tails may get lost in the coarse parts of the image.

	LEVEL (R)	0
	When	•
	“MANUAL” is	•
	selected.	[32]
		•
		63
	LEVEL (B)	– 8	The blue color in the white balance can be adjusted when [WHITE
	When	– 7
			BAL] is set to “AUTO” or “MANUAL”.
	“AUTO” is	•	Increasing the value:	Blue tint of screen becomes stronger
	selected.	[NORMAL]	Decreasing the value:	Blue tint of screen becomes weaker
		•
		8
	LEVEL (B)	0
	When	•
	“MANUAL” is	•
	selected.	[32]
		•
		63
Color temperature when COLOR TEMP and WHITE BALACNCE are set. * Regard the values as reference values.

GAMMA

MASTER BLACK

FLARE

LEVEL (R) When “ON” is

[ON]	ON:	The video signal is compensated to make the
OFF	OFF:	image viewed on the screen natural.
		No compensation and the video signal is out-
		put linearly.
–32	Used to adjust the pedestal level (master black), which is
–31	the standard of black when the lens is capped. To see

•more details in black areas, raising the pedestal level will

[0]brighten the entire screen.

•Increasing the value: Raises the pedestal level

31 Decreasing the value: Lowers the pedestal level

[ON]	Compensation of the black level when flaring effect oc-
OFF	curs and black areas are tinted with color due to irregular
	reflection of light entering the lens.
–32	Compensation of the black level of Rch
–31	Increasing the value: Red tint becomes weaker

COLOR	WHITE
	BALANCE
TEMP
	PRESET
3200K	AUTO
	MANUAL
	PRESET
5600K	AUTO
	MANUAL

		COLOR TEMP
2200K	3200K	5600K	15000K
	3000K		6000K

selected

L E V E L ( B ) When “ON” is selected

[NORMAL]	Decreasing the value: Red tint becomes stronger
•
31
–32	Compensation of the black level of Bch
–31	Increasing the value:	Blue tint becomes weaker
[NORMAL]	Decreasing the value:	Blue tint becomes stronger
•
31

E36 E37