JVC KY-F1030 manual Lens screen

5. Menu screen settings (continued)

PROCESS screen (continued)
[ ] indicates the factory setting
Item	Set Value		Contents
ABL	[ON]	Used to set whether to use automatic adjustment of the
	OFF	black level in accordance with the signal level during shoot-
		ing. Use this adjustment when the black level of the video
		image fluctuates.
LEVEL	–32	Black level is adjusted.
When “ON” is	–31	Increasing the value:	Lowers the black level.
selected	•		(Compensation becomes higher)
	[NORMAL]	Decreasing the value:	Raises the black level.

PROCESS screen
[ ] indicates the factory setting
Item	Set Value
PIXEL COMP.	[OFF]
	ON
PIXEL
CHECK

	Contents
Selects whether or not white spot compensation should
be performed.
OFF	: White spot compensation not performed.
ON	: White spot compensation performed.

page E28 [White spot compensation]

Detects the positions of white spots.

page E28 [White spot compensation]

•		(Compensation becomes smaller)
31
COLOR MATRIX. [NORMAL]	Used to set whether the color matrix value should be a
ADJUST	standard value or variable.
	NORMAL:	Standard value used for color matrix.
	ADJUST:	The color matrix becomes variable.
		The following adjustments can only be made
		when this setting is selected.

LENS screen
[ ] indicates the factory setting
Item	Set Value
IRIS	[AUTO]
	MANUAL

	Contents
Switched in accordance with the employed lens.
AUTO:	When auto-iris lens is employed.
MANUAL:	• When manual iris lens is employed.

• No lens mounted.

B – Y GAIN (+) When “ADJUST” is selected

B – Y GAIN (–)

–8	Adjusts the color saturation.
–7	Increasing the value: Colors become more glowing

•Decreasing the value: Colors become duller

[NORMAL]	°	B – Y GAIN (+): More blue
•		B – Y GAIN (–): More yellow

• When auto-iris lens is mounted but used as

manual iris lens.

* If the auto-iris lens cable is not connected to the [LENS]

connector, the setting automatically becomes “MANUAL”.

When “ADJUST” is selected

R – Y GAIN (+) When “ADJUST” is selected

7	°	B – Y GAIN (+): More red/magenta
	°
8		B – Y GAIN (–): More green/cyan
	°

IRIS LEVEL When “MANUAL” is selected

0 1 • [128] • 255

Sets the iris level when “MANUAL” is selected for the IRIS MODE. Increasing the value: Opens the iris Decreasing the value: Closes the iris

R – Y GAIN (–) When “ADJUST” is selected

B –G HUE (+) When “ADJUST”

–32	Adjusts the hue.
–31	°	B – G HUE (+): More blue

SERVO SEL

[POSITION] SPEED

Sets the lens control method.

Normally, use the “POSITION” setting.

*If the lens control cable is not connected to the [MD CONTROL] connector, “---- ” is displayed.

is selected

B – G HUE (–) When “ADJUST” is selected

R – G HUE (+) When “ADJUST” is selected

•° B – G HUE (–): More yellow

[NORMAL] ° R – G HUE (+): More red/magenta

•° R – G HUE (–): More green/cyan

30

31

FOCUS	0
When	1
“POSITION”	•
is	[128]
selected	•
	255
ZOOM When	0
“POSITION”	1
is selected	•

Selects the focus position.
Increasing the value:	Focus far away
Decreasing the value:	Focus nearby
Selects the zoom position.
Increasing the value:	Toward telephoto
Decreasing the value:	Toward wide-angle

R – G HUE (–) When “ADJUST” is selected

[128]

•

255

E38 E39