1. Introduction (continued)
Part names and their functions (continued)
[Rear]
| ||
ANALOG OUT | IEEE1394 |
|
|
| |
LENS |
|
|
MD | ||
CONTROL | ||
DC IN | REMOTE |
|
POWER |
|
|
|
| |
SEE INSTRUCTION MANUAL |
| |
| ||
[ANALOG OUTPUT] connector
Analog output connector for video signal. Used when connecting the camera to an
MEMO Only output when the AC adapter (AA- P700) is used as the power supply.
[IEEE1394] digital output con- nector Digital output connector for video signal. Used when connecting to the PC’s IEEE 1394 host adapter. Pin configurations of connectors ( page E13) [LENS] connector 1 To connect the lens’ camera cable (for iris control, power supply). Pin configurations of connectors ( page E12) Mounting the lens ( page E17)
[POWER] indicator Lights when power is supplied to the cam- era.
[DC IN] connector (Mini DIN
[REMOTE] terminal (Metal 10-pin, female)
Used to connect external devices such as a trigger switch or flash unit. Pin configurations of connectors ( page E12) Connecting through digital output connec- tor ( page E14) Synchronizing flash and trigger ( page E26)
[MD CONTROL] lens connector
2 To connect the lens control cable (for zoom, focusing control). Pin configurations of connectors ( page E12) Mounting the lens ( page E17)
MEMO The motorized lens can only be controlled (zoom, IRIS, focus) from the
[Side switch panel section (inside)]
| UP/AW |
MENU | SET |
| |
| DOWN |
1 2 | 3 4 |
|
[MENU] button Press this button to output the menu screen through the [ANALOG OUT] connector . Press again to stop display of the menu. Setting procedure ( page E32)
[UP/AW] auto white balance, UP button
●[AW (auto white)]
Press this button to adjust the white bal-
ance when the light source illuminating the subject changes. White balance adjustment ( page E22)
●[UP]
While the menu screen is displayed, press this button to move up to a select- able item on the menu. While an item is selected, use this button to change the set value.
Setting procedure ( page E32)
[SET] button |
|
| |
While the menu screen is displayed, press | |||
this button to select a submenu or confirm | |||
a selected item or set value. | |||
Setting procedure( page E32) | |||
[DOWN] button | |||
While the menu screen is displayed, press | |||
this button to move down to a selectable | |||
item on the menu. While an item is selected, | |||
use this button to change the set value. | |||
Setting procedure( page E32) | |||
Function setting switch | |||
Used for setting the functions of the KY- | |||
F1030. |
|
|
|
ON |
|
|
|
OFF | 2 | 3 | 4 |
1 | |||
●Switch 1 <TEST PATTERN> ON: Test signal is output.
OFF: The image being shot by the cam- era is output. Monitor adjustment ( page E21) SYSTEM SETTING screen ( page E40)
●Switch 2 <MENU LOCK>
ON: Disables the [MENU] button .
OFF: Enables the [MENU] button .
●Switch 3 <SYNC ON GREEN>
ON: Applies the sync signal to the green
(G)channel of the video signal that is output through the ANALOG OUT connector .
OFF: The sync signal is not applied.
●Switch 4 <RESERVED>
This switch is not used. Leave it at OFF.
E10 | E11 |