JVC KY-F1030 manual Resetting menu settings, Zoom

5. Menu screen settings (continued)

MENU (QUICK) screen (continued)
[ ] indicates the factory setting
Item	Set Value				Contents
SHUTTER			MEMO
		• When the shutter speed is slower than 1/7.5 s, the following
		phenomena may occur.
SPEED	3.990s	1)	The screen update rate becomes longer in the case of digital output.
		2)	The displayed image will appear intermittently in the case of analog output.
When	•
		3)	Time will be required for the auto white, auto iris and ALC operations.
“V.SCAN” is	•
		If the shutter speed is set slower than 1 s, these operations will
selected	[1/7.501s]
		behave as follows.
	•	Auto white		:	Auto white balance function cannot be started.
	•				( page E23 White balance adjustment)
	1/5906.836s	Auto iris		:	Stops at the iris value at that time.
		ALC		:	Stops at the sensitivity at that time.
SPEED	1/7.500s
		To use a shutter speed slower than 1 s, use with the following settings selected:
When	•
		IRIS MODE		: MANUAL
“RANDOM” is	[1/126.134s]
		GAIN		: STEP or V.GAIN
selected	•
		• There may be shortage of light when the shutter speed is increased. In
	•	this case, adjust the iris or sensitivity. Attention should be paid to the pic-

Resetting menu settings
This settings made on the menu screens can be returned to the initial settings as when shipped
from the factory.
	1.	Open the side switch panel, and press the [MENU] but-
		ton for 2 seconds or longer.
		The [MENU] screen appears on the monitor screen.
Inside window	2.	Press the [UP] or [DOWN] button to select [5. SYSTEM
		SETTING] (displayed in purple when selected), and then
	[UP]	press the [SET] button.
UP/AW		The [SYSTEM SETTING] screen appears.
[MENU]	[SET]
MENU SET	[DOWN]
DOWN
1 2 3 4

1/5648.193s ture quality when the sensitivity is raised since the image becomes coarse.

3.

Press the [UP] or [DOWN] button to select [MENU RE- SET] (displayed in purple when selected), and then

GAIN	[STEP]
	ALC
	V.GAIN
LEVEL When	[0dB]
“STEP” is	+6dB
selected	+12dB
LEVEL When	[0dB]
“V. GAIN” is	+0.2dB
selected	+0.4dB
	•
	•

Used to switch the sensitivity mode.
STEP:	The sensitivity can be changed with the “LEVEL”
ALC:	item.
	The sensitivity is automatically changed in ac-
	cordance with ambient brightness.
V. GAIN: The sensitivity can be changed in detail with the
	“LEVEL” item.

MENU screen

4.

press the [SET] button The [MENU RESET] screen appears.

When the [SET] button is pressed, all the menu set- tings are returned to the initial settings. At this time, the “MENU RESET OK” message appears for about 3 seconds before the [SYSTEM SETTING] screen returns.

	+12dB
FOCUS	0
	1
	•
	[128]
	•
	255
ZOOM	0
	1
	•
	[128]
	•
	255

Selects the focus position.
Increasing the value:	Focus far away
Decreasing the value:	Focus nearby
Selects the zoom position.
Increasing the value:	Toward telephoto
Decreasing the value:	Toward wide-angle

5.	Press the [MENU] button again to return to the normal
	screen.

SYSTEM SETTING screen

MENU RESET screen Completion screen

E42 E43