JVC TK-WD31 manual Rear Panel, Video OUT Video signal output connector, Power Power indicator lamp

Page 16

INTRODUCTION

Names and Operations of Parts

	[Rear Panel]
		SEE INST-		DC12V
		RUCTION		AC24V	1	2
	8	MANUAL
	8
		CLASS 2 ONLY (U TYPE)
		ISOLATED POWER ONLY
				(E TYPE)
	9					A
	0					A
	0	POWER	VIDEO OUT		SET	SELECTOR
					SET	SELECTOR

		LL	INT			B
						B
	C

8[DC 12V, AC 24V] Power input terminals To input DC 12V or AC 24V power.

9[VIDEO OUT] Video signal output connector

This BNC connector outputs a composite video signal. Connect this to the video input connector of a video monitor, switcher, etc.

0[POWER] Power indicator lamp

This lamp lights when power is supplied to the camera.

10

Image 16

Contents Color Video Camera TK-WD310INSTRUCTIONS LWT0181-001B-HImportant Safeguards Page III Page Safety Precautions Page Features IntroductionMemo Reference page or itemContents Operating Precautions Introduction Page Names and Operations of Parts Backfocus adjustment ringFront and Bottom Lens mount Use a screw shorter than 7 mm. Camera-mounting bracketRotation prevention hole Video OUT Video signal output connector Power Power indicator lampThis lamp lights when power is supplied to the camera Rear PanelSelector button SET buttonThis is set for internal synchronization INT VIDEO/DC Iris Selector Switch Side PanelIris Iris Terminal This is connected to an automatic iris control lens.Basic System System with up to 8 camerasMount the lens according to the procedures described below Mounting the lensVideo DC Iris Video IrisGND Power supply DC 12 V or AC 24 Connections on the back100 m 260 m 410 m 500 m Reference Conductor diameter Φmm MoreMounting the camera Fall Prevention Auto iris lens adjustment Level adjustment Level turning directionToo bright Too dark Clockwise Toward HBack focus adjustment With a fixed-focus lens With a zoom lensMenu settings OperationC M OD E Menu tree Menu screens are structured as shown belowFocus Adjust screen Default setting OFFAbout menus ModeVideo Adjust screen WDR ModeWide Dynamic Range WDR is adjusted manually WDR ModeContent WDR BiasWDR Limit EXP. BiasAGC Mode Setting GainMemo Default setting ATW White BalanceManual PreparationCamera Settings screen This setting is performed when using the DC auto iris lensColor Level Enhance LevelPhase Camera TitleDC Gain DC OffsetCamera Title Edit screen Repeat steps 4. and 5. above to enter up to 24 characters Allowed characters Returns set values to their factory settings Factory Settings screenClear Troubleshooting Symptom RemedyOperation becomes un Ultra Super High MID LOW OFF MAX MINSpecifications Video OUTLx 50%, F1.2, AGC High Lx 50%, F1.2, AGC ULTRA⋅16TK-WD310 Color Video Camera