JVC TK-WD31 manual Video Adjust screen, WDR Mode

Page 34

MENU SETTING

VIDEO ADJUST screen

WDR MODE

Default setting: MODE2

Setting of the wide dynamic range (WDR) is performed. CUSTOM : Manually adjusts the wide dynamic range.

Pressing the SET button will display the WDR CUSTOM SETTINGS screen. ( Page 30)

MODE1	: When shooting in a bright area outdoors
MODE2	: Standard video
MODE3	: To brighten the video taken indoors
MODE4	: To brighten areas with little luminance in video with large
	difference in brightness
	(When moving from dark indoors to outdoors during shoot-
	ing)
FLUOR	: For video taken under lighting (fluorescent lighting, etc.)
	that synchronizes with commercial electrical power supply
	frequency resulting in periodical change in colors
	(When in a 60Hz area, set to LL (Line Lock).)
	( Pages 11, 36)

Memo

●The Wide Dynamic Range feature controls the exposure time using up to 5 sampling timing within a single screen according to the brightness of the subject. With the Wide Dynamic Range feature, the subject with a large difference in brightness with the remainder of the screen can be viewed in a clear, natural state even when shooting in areas with large difference in lighting (such as indoors easily influenced by backlight, afternoon sun, etc., entrances and near windows).

●Set the mode by first checking under the usage environment.

28

Image 34

Contents Color Video Camera TK-WD310INSTRUCTIONS LWT0181-001B-HImportant Safeguards Page III Page Safety Precautions Page Features IntroductionMemo Reference page or itemContents Operating Precautions Introduction Page Names and Operations of Parts Backfocus adjustment ringFront and Bottom Lens mount Use a screw shorter than 7 mm. Camera-mounting bracketRotation prevention hole This lamp lights when power is supplied to the camera Video OUT Video signal output connectorPower Power indicator lamp Rear PanelSelector button SET buttonThis is set for internal synchronization INT Iris Iris Terminal VIDEO/DC Iris Selector SwitchSide Panel This is connected to an automatic iris control lens.Basic System System with up to 8 camerasMount the lens according to the procedures described below Mounting the lensVideo DC Iris Video IrisGND Power supply DC 12 V or AC 24 Connections on the back100 m 260 m 410 m 500 m Reference Conductor diameter Φmm MoreMounting the camera Fall Prevention Auto iris lens adjustment Too bright Level adjustmentLevel turning direction Too dark Clockwise Toward HBack focus adjustment With a fixed-focus lens With a zoom lensMenu settings OperationC M OD E Menu tree Menu screens are structured as shown belowAbout menus Focus Adjust screenDefault setting OFF ModeVideo Adjust screen WDR ModeWide Dynamic Range WDR is adjusted manually WDR ModeWDR Limit ContentWDR Bias EXP. BiasAGC Mode Setting GainMemo Default setting ATW White BalanceManual PreparationColor Level Camera Settings screenThis setting is performed when using the DC auto iris lens Enhance LevelDC Gain PhaseCamera Title DC OffsetCamera Title Edit screen Repeat steps 4. and 5. above to enter up to 24 characters Allowed characters Returns set values to their factory settings Factory Settings screenClear Operation becomes un TroubleshootingSymptom Remedy Ultra Super High MID LOW OFF MAX MINLx 50%, F1.2, AGC High SpecificationsVideo OUT Lx 50%, F1.2, AGC ULTRA⋅16TK-WD310 Color Video Camera