JVC TK-WD31 manual Camera Title, Phase, DC Gain, DC Offset

		5. When selecting EXIT and press-
			ing the SET button, the screen will
			return to the CAMERA SET-
			TINGS screen.
	Item		Content
DC GAIN		Adjusts operating speed of the DC auto iris lens.
		Adjust according to the lens used.
		Increasing the value: the speed will increase
		[Setting range: 0 ~ 60 (default setting) ~ 255]
		* Depending on the lens, hunching may occur
		when setting this value too high. In this case,
		lower the value.
DC OFFSET		Standard level (brightness) for controlling the DC
		auto iris operation is set.
		Increasing the value: the screen will become darker
		[Setting range: 100 ~ 120 (default setting) ~ 150]
CAMERA TITLE			Default setting: OFF
Whether to display the camera title is set.
OFF	: Camera title is not displayed.
ON	: Camera title is displayed.

V PHASE

Vertical phase during line lock is adjusted. The vertical phase can be adjusted to other cameras. This setting is enabled when the LL/INT switch on the back of the unit is set to LL.

— — — CA M E RA S E T T I N G S — — —

L E N S A D J U S T . .
C A ME R A T I T L E			O F F
C A ME R A T I T L E E D I T
V P H A S E
	0	8 4		1 0 4
E X I T

●Press the SELECTOR button in the horizontal direction (8 or t) to set. Pressing in the button to the right (t) will advance the phase and pressing to the left (8) will delay the phase.

36

Set value