JVC TK-WD31 manual Memo

Page 38

Memo

When raising the gain, noise will appear in the screen for dark areas.

When in a dark area and setting AGC MODE to HIGH (2) and up:

Video may temporarily lock or noise may be noticeable.

The entire screen may temporarily change from a dark to a bright state.

When especially dark, depending on light intensity, the Wide Dynamic Range (WDR) feature will not function.

(The WDR feature will function in normal light intensities.)

The right edge of the screen may temporarily jiggle.

For temperatures higher than the recommended temperature, the slow shutter may not work correctly.

32

Image 38
Contents Color Video Camera TK-WD310INSTRUCTIONS LWT0181-001B-HImportant Safeguards Page III Page Safety Precautions Page Features IntroductionMemo  Reference page or itemContents Operating Precautions Introduction Page Front and Bottom Lens mount Backfocus adjustment ringNames and Operations of Parts Rotation prevention hole Camera-mounting bracketUse a screw shorter than 7 mm. This lamp lights when power is supplied to the camera Video OUT Video signal output connectorPower Power indicator lamp Rear PanelThis is set for internal synchronization INT SET buttonSelector button Iris Iris Terminal VIDEO/DC Iris Selector SwitchSide Panel This is connected to an automatic iris control lens.Basic System System with up to 8 camerasMount the lens according to the procedures described below Mounting the lensGND DC Iris Video IrisVideo Power supply DC 12 V or AC 24 Connections on the back100 m 260 m 410 m 500 m Reference Conductor diameter Φmm MoreMounting the camera Fall Prevention Auto iris lens adjustment Too bright Level adjustmentLevel turning direction Too dark Clockwise Toward HBack focus adjustment With a fixed-focus lens With a zoom lensMenu settings OperationC M OD E Menu tree Menu screens are structured as shown belowAbout menus Focus Adjust screenDefault setting OFF ModeVideo Adjust screen WDR ModeWide Dynamic Range WDR is adjusted manually WDR ModeWDR Limit ContentWDR Bias EXP. BiasAGC Mode Setting GainMemo Default setting ATW White BalanceManual PreparationColor Level Camera Settings screenThis setting is performed when using the DC auto iris lens Enhance LevelDC Gain PhaseCamera Title DC OffsetCamera Title Edit screen Repeat steps 4. and 5. above to enter up to 24 characters Allowed characters Clear Factory Settings screenReturns set values to their factory settings Operation becomes un TroubleshootingSymptom Remedy Ultra Super High MID LOW OFF MAX MINLx 50%, F1.2, AGC High SpecificationsVideo OUT Lx 50%, F1.2, AGC ULTRA⋅16TK-WD310 Color Video Camera