JVC TK-WD31 manual Mounting the camera

Page 24

CONNECTION/INSTALLATION

Mounting the camera

Camera mounting screw hole

Camera mounting bracket

Rotation prevention hole

When mounting the camera on a fixer, pan/tilt, etc., use the camera mounting screw hole located on the camera-mounting bracket.

CAUTION:

Use the screw with a length shorter than 7mm from a camera-mounting face.

MAX. 7mm

Furthermore, make use of the rotation prevention hole to prevent the camera from falling and securely mount the camera.

Special precautions must be taken for mounting the camera on a wall or a ceiling. We are not liable for any damage caused by improper installation.

18

Image 24

Contents Color Video Camera TK-WD310INSTRUCTIONS LWT0181-001B-HImportant Safeguards Page III Page Safety Precautions Page Features IntroductionMemo Reference page or itemContents Operating Precautions Introduction Page Backfocus adjustment ring Names and Operations of PartsFront and Bottom Lens mount Camera-mounting bracket Use a screw shorter than 7 mm.Rotation prevention hole Video OUT Video signal output connector Power Power indicator lampThis lamp lights when power is supplied to the camera Rear PanelSET button Selector buttonThis is set for internal synchronization INT VIDEO/DC Iris Selector Switch Side PanelIris Iris Terminal This is connected to an automatic iris control lens.Basic System System with up to 8 camerasMount the lens according to the procedures described below Mounting the lensDC Iris Video Iris VideoGND Power supply DC 12 V or AC 24 Connections on the back100 m 260 m 410 m 500 m Reference Conductor diameter Φmm MoreMounting the camera Fall Prevention Auto iris lens adjustment Level adjustment Level turning directionToo bright Too dark Clockwise Toward HBack focus adjustment With a fixed-focus lens With a zoom lensMenu settings OperationC M OD E Menu tree Menu screens are structured as shown belowFocus Adjust screen Default setting OFFAbout menus ModeVideo Adjust screen WDR ModeWide Dynamic Range WDR is adjusted manually WDR ModeContent WDR BiasWDR Limit EXP. BiasAGC Mode Setting GainMemo Default setting ATW White BalanceManual PreparationCamera Settings screen This setting is performed when using the DC auto iris lensColor Level Enhance LevelPhase Camera TitleDC Gain DC OffsetCamera Title Edit screen Repeat steps 4. and 5. above to enter up to 24 characters Allowed characters Factory Settings screen Returns set values to their factory settingsClear Troubleshooting Symptom RemedyOperation becomes un Ultra Super High MID LOW OFF MAX MINSpecifications Video OUTLx 50%, F1.2, AGC High Lx 50%, F1.2, AGC ULTRA⋅16TK-WD310 Color Video Camera