JVC TK-WD31 manual Factory Settings screen, Returns set values to their factory settings, Clear

Page 45

MENU SETTING

FACTORY SETTINGS screen

Returns set values to their factory settings.

— — — M E N U — — —

F OC U S A D J U S T . .

V I D E O A D J U S T . .

C AM E R A S E T T I N G S . .

F A C T O R Y S E T T I N G S . .

E X I T

Cursor

— — — F A C T OR Y S E T T I N G S — — —

C A N C E L

CL E A R

Operation

1.Display the FACTORY SET- TINGS screen. ( Page 24)

2.Press the SELECTOR button in the vertical direction (6 or 7) and move the cursor (>) to

CLEAR.

3.Press the SET button.

●Settings including the camera title will be restored to the fac- tory settings and the screen will return to the MENU screen.

*Select CANCEL and press the SET button to return to the MENU screen without chang- ing settings.

4.Exit the menu screen.

Select EXIT within the MENU screen and press the SET but- ton to return to the normal screen.

39

Image 45

Contents LWT0181-001B-H Color Video Camera TK-WD310INSTRUCTIONSImportant Safeguards Page III Page Safety Precautions Page Introduction Features Reference page or item MemoContents Operating Precautions Introduction Page Backfocus adjustment ring Names and Operations of PartsFront and Bottom Lens mount Camera-mounting bracket Use a screw shorter than 7 mm.Rotation prevention hole Power Power indicator lamp Video OUT Video signal output connectorThis lamp lights when power is supplied to the camera Rear PanelSET button Selector buttonThis is set for internal synchronization INT Side Panel VIDEO/DC Iris Selector SwitchIris Iris Terminal This is connected to an automatic iris control lens.System with up to 8 cameras Basic SystemMounting the lens Mount the lens according to the procedures described belowDC Iris Video Iris VideoGND Connections on the back Power supply DC 12 V or AC 24Conductor diameter Φmm More 100 m 260 m 410 m 500 m ReferenceMounting the camera Fall Prevention Auto iris lens adjustment Level turning direction Level adjustmentToo bright Too dark Clockwise Toward HBack focus adjustment With a zoom lens With a fixed-focus lensOperation Menu settingsC M OD E Menu screens are structured as shown below Menu treeDefault setting OFF Focus Adjust screenAbout menus ModeWDR Mode Video Adjust screenWDR Mode Wide Dynamic Range WDR is adjusted manuallyWDR Bias ContentWDR Limit EXP. BiasSetting Gain AGC ModeMemo White Balance Default setting ATWPreparation ManualThis setting is performed when using the DC auto iris lens Camera Settings screenColor Level Enhance LevelCamera Title PhaseDC Gain DC OffsetRepeat steps 4. and 5. above to enter up to 24 characters Camera Title Edit screen Allowed characters Factory Settings screen Returns set values to their factory settingsClear Symptom Remedy TroubleshootingOperation becomes un Ultra Super High MID LOW OFF MAX MINVideo OUT SpecificationsLx 50%, F1.2, AGC High Lx 50%, F1.2, AGC ULTRA⋅16TK-WD310 Color Video Camera