JVC TK-WD31 Camera Title Edit screen, Repeat steps 4. and 5. above to enter up to 24 characters

Page 43

MENU SETTING

CAMERA SETTINGS screen (continued)

CAMERA TITLE EDIT screen

Up to 24 characters can be entered for the camera title. The entered camera title will appear on the bottom left of the screen when the CAM- ERA TITLE menu item is set to ON.

— — — CA M E RA S E T T I N G S — — —


L E N S A D J U S T . .
C A ME R A	T I T L E			O F F
C A ME R A	T I T L E E D I T
V P H A S E
	0		8 4			1 0 4

E X I T

1st character

To correct a character, press the SET button to display the character to correct in purple, press the SELECTOR button in the horizontal direction (8 or t) to change the character.

Operation

1.Display the CAMERA SETTINGS screen. ( Page 24)

2.Press the SELECTOR button in the vertical direction (6 or 7) and move the cursor (>) to se- lect CAMERA TITLE EDIT.

3.Press the SET button.

●The 1st character will appear in purple and input will be al- lowed.

4.Press the SELECTOR button in the horizontal direction (8 or t) and select the desired character.

5.Press the SET button to confirm the 1st character. The 2nd char- acter will then appear in purple.

6.Repeat steps 4. and 5. above to enter up to 24 characters.

7.To end character entry, press the SELECTOR button in the verti- cal direction (6 or 7) and move the cursor (>) to another item.

37

Image 43

Contents LWT0181-001B-H Color Video Camera TK-WD310INSTRUCTIONSImportant Safeguards Page III Page Safety Precautions Page Introduction Features Reference page or item MemoContents Operating Precautions Introduction Page Names and Operations of Parts Backfocus adjustment ringFront and Bottom Lens mount Use a screw shorter than 7 mm. Camera-mounting bracketRotation prevention hole Rear Panel Video OUT Video signal output connectorPower Power indicator lamp This lamp lights when power is supplied to the cameraSelector button SET buttonThis is set for internal synchronization INT This is connected to an automatic iris control lens. VIDEO/DC Iris Selector SwitchSide Panel Iris Iris TerminalSystem with up to 8 cameras Basic SystemMounting the lens Mount the lens according to the procedures described belowVideo DC Iris Video IrisGND Connections on the back Power supply DC 12 V or AC 24Conductor diameter Φmm More 100 m 260 m 410 m 500 m ReferenceMounting the camera Fall Prevention Auto iris lens adjustment Too dark Clockwise Toward H Level adjustmentLevel turning direction Too brightBack focus adjustment With a zoom lens With a fixed-focus lensOperation Menu settingsC M OD E Menu screens are structured as shown below Menu treeMode Focus Adjust screenDefault setting OFF About menusWDR Mode Video Adjust screenWDR Mode Wide Dynamic Range WDR is adjusted manuallyEXP. Bias ContentWDR Bias WDR LimitSetting Gain AGC ModeMemo White Balance Default setting ATWPreparation ManualEnhance Level Camera Settings screenThis setting is performed when using the DC auto iris lens Color LevelDC Offset PhaseCamera Title DC GainRepeat steps 4. and 5. above to enter up to 24 characters Camera Title Edit screen Allowed characters Returns set values to their factory settings Factory Settings screenClear Ultra Super High MID LOW OFF MAX MIN TroubleshootingSymptom Remedy Operation becomes unLx 50%, F1.2, AGC ULTRA⋅16 SpecificationsVideo OUT Lx 50%, F1.2, AGC HighTK-WD310 Color Video Camera