JVC GR-AXM700 manual Manual White Balance Adjustment M.W.B

LCD monitor or viewfinder

	MENU
4MENU END		AUTO
FOCUS
EXPOSURE		AUTO
DATE TIME		DEC 25. 98
TELE MACRO		OFF
TAPE LENGTH T30
M. W. B.	SPEED	AUTO
ZOOM		FAST
4NEXT
Menu Screen
					M. W. B.
			AUTO
				: FINE
				: CLOUD
				: HALOGEN
			MWB
			EXIT
			M.W.B. Menu Screen

Select Dial

MENU Jog Dial

NOTES:

●To switch to automatic white balance adjustment, set the M.W.B. in the Menu Screen to “AUTO”, or turn the Select Dial to “AUTO LOCK”.

●Re-adjust the White Balance when the lighting has changed, when the camcorder has been turned off and on again, or when the Select Dial’s position has been changed.

●When adjusted by putting colored paper in front of the subject in step 1 of “MWB”, this unit makes its color temperature standard for automatic white balance. So you can enjoy shooting with different colors. For example, when adjusting with red, blue or yellow colors, the image becomes the color which approximates to green, orange or purple respectively.

EN39

Manual White Balance Adjustment (M.W.B.)

The white balance is usually adjusted automatically. However, the more advanced camcorder operator would prefer to control this function manually and achieve a more professional color/tint reproduction.

ACCESS MENU SCREEN

1 Turn the Select Dial to any position except AUTO LOCK, then press the MENU Jog Dial. The Menu Screen appears.

ACCESS WHITE BALANCE MENU SCREEN

2 Rotate the MENU Jog Dial to move the highlight bar to “M.W.B.”, then press it.

SELECT WHITE BALANCE

3 Rotate the MENU Jog Dial to move the highlight bar to the required white balance.

“AUTO”		Automatic adjustment
“	: FINE”	Outdoors on sunny day
“	: CLOUD”	Outdoors on cloudy day
“	: HALOGEN” ...	Light source is halogen or
		tungsten lamp
“MWB”		When using a personal White
		Balance Setting stored in
		memory (see below.)

CLOSE MENU

4 Press the MENU Jog Dial. The Menu Screen reappears. Then press the MENU Jog Dial again to exit the Menu Screen.

MWB

MWB sets the color temperature for the subject’s light source so you can shoot with natural colors that are unaffected by surroundings, even when there are multiple subjects with different color temperatures.

PREPARE WHITE OBJECT

1 Point the camcorder at a white, flat object such as a sheet of white paper.

SELECT MWB

2 Follow step 1 through 3 of the above, select “MWB”.

MEMORIZE WHITE BALANCE

3 Press the MENU Jog Dial until “MWB” begins blinking. “MWB” blinks while the white balance is being stored in memory, then the Menu Screen reappears when memorization is complete.

CLOSE MENU

4 Press the MENU Jog Dial.