CLEAN LENS
Blow it with a blower brush, then wipe gently with lens cleaning paper.
REMOVE EYEPIECE
Turn the eyepiece counterclockwise and pull it out.
CLEAN VIEWFINDER
Remove dust using a blower brush.
Align the marks, re-attach the eyepiece and turn it clockwise.
CLEAN LCD MONITOR
Wipe gently with a soft cloth.
1
2 Open the LCD monitor and wipe gently with soft cloth. Be careful not to damage the monitor. Close the LCD monitor.
Cleaning The Camcorder
CLEAN EXTERIOR
Set the Power Switch to “POWER OFF” to turn off the camcorder.
Press EJECT to open the cassette holder, then remove the cassette.
Close and lock the cassette holder by pressing PUSH.
USERMAINTENANCE
LENS COVER
Open/Close Switch
Set to “POWER OFF”.
BATT. RELEASE
PUSH EJECT
Remove.
EN73
After Use
1
2
3
4 Close and lock the LCD monitor.
5 Slide BATT. RELEASE to remove the battery pack.
6 Slide the LENS COVER open/close switch to close the lens cover.
Marks
3
4
5
6
NOTES:
●Avoid using strong cleaning agents such as benzine or alcohol.
●Cleaning should be done only after the battery pack has been removed or other power units have been disconnected.
●Mold may form if the lens is left dirty.