42EN
VIDEOPLAYBACKBasicPlayback
System Select Switch
REW | Power Switch |
PLAY/PAUSE
FF
STOP
LCD Monitor in Retracted Position
Battery pack remaining power indicator
Tape counter
Recording mode indicator
LOAD A CASSETTE
1 First open the LCD monitor to an angle of over 45 degrees. Press EJECT to open the cassette holder, then insert the cassette with the label facing out. Press PUSH to ensure the holder is closed and locked.
SELECT MODE
2 Make sure the LCD monitor is fully open. Set the System Select Switch to “VIDEO”, then set the Power Switch to “PLAY”. The power indicator lights.
PLAY BACK
3 Press PLAY/PAUSE. The playback picture appears.
4
Rewind or Fast-forward the tape
Press REW to rewind, or FF to
NOTES:
● The camcorder shuts off automatically after about 5 | |
minutes in Stop mode. To turn on again, set the Power | |
Switch to “POWER OFF”, then to “PLAY”. | |
● When the Power Switch is set to “PLAY” and the LCD | |
monitor is opened at an angle of 45 degrees or more, | |
the LCD monitor switches on and the viewfinder | |
switches off automatically to save power. | |
● The playback picture can also be viewed in the | |
viewfinder (with the LCD monitor shut) or on a | |
connected TV (☞ pg. 46). Camcorder operation is the | |
same as described in this section. | |
● You can also view the playback picture on the LCD | |
monitor with it flipped over and retracted. | |
● LCD monitor/viewfinder indications: | |
•The battery pack remaining power indicator is | |
displayed for approx. 5 seconds on the LCD monitor | |
when the LCD monitor is turned on, and then it | |
disappears. However, the battery pack remaining | |
power indicator “ | ” blinks when the power is |
SP 4
LCD monitor/
viewfinder indications
Tape running indicator
4: Playback
3:
Forward Search 2: Rewind/Reverse
Search
6 : Still Playback
almost gone. |
•During Stop, |
the indications are displayed in the viewfinder. |