JVC GR-AXM700 Quick Operation Guide Video, Using the battery pack, To remove the battery pack

6EN

QUICKOPERATIONGUIDE(VIDEO)

SUPPLY POWER

Hook on.

1

2 Push in.

BATT. RELEASE

Using the battery pack

1Hook-on the battery pack’s top end to the camcorder. (Charging procedure, ☞ pg. 10)

2Push in the battery pack until it locks into place.

To remove the battery pack

Slide BATT. RELEASE and pull out the battery pack.

INSERTING A VIDEO

CASSETTE

PUSH	EJECT
	2
4	3

1Open

1 Open the LCD monitor to an angle of over 45 degrees.

2Press EJECT to open the cassette holder.

3 Insert a video cassette.

4 Press PUSH to close the cassette holder. (For more details, ☞ pg. 17)

PLAYBACK

PLAY/PAUSE 4 STOP

1 Set to “VIDEO”

3 REW

Set to “PLAY”2

1Set the System Select Switch to “VIDEO”.

2 Set the Power Switch to “PLAY”.

3 Press REW.

—The tape will automatically stop at the beginning of the tape.

4Press PLAY/PAUSE.

—Playback starts and the playback picture appears.

•To stop playback, press STOP. (For more details, ☞ pg. 42.)

•The viewfinder switches off automatically to save power when the LCD monitor is opened at an angle of over 45 degrees.

•The LCD monitor turns on/off when it is opened/closed at approx. 45 degrees.

Or simply play back the tape on a VHS VCR

using the Cassette Adapter (VHS Playpak). ☞ pg. 45

SHOOTING

1 LENS COVER

Open/Close

Set toSwitch “VIDEO”

2	4
	Recording
	Start/Stop
3	Button
Set to
“CAMERA”

1Slide the LENS COVER Open/Close Switch to open the lens cover.

2Set the System Select Switch to “VIDEO”.

3 Set the Power Switch to “CAMERA”.

—The power indicator will light and an image will appear.

4Press the Recording Start/Stop Button.

— Recording starts.

•To stop recording temporarily, momentarily press the Recording Start/Stop Button once again.

(For more details, ☞ pgs. 18 – 21)

•The viewfinder switches off automatically to save power when the LCD monitor is opened at an angle of over 45 degrees.

•The LCD monitor turns on/off when it is opened/closed at approx. 45 degrees.