JVC GR-AXM700 manual Quick Operation Guide D.S.C

QUICKOPERATIONGUIDE(D.S.C.)

EN7

SUPPLY POWER	SHOOTING
Hook on.	4 SNAPSHOT Button
1
		1
2 Push in.		LENS COVER
		Open/Close
	3	Switch
BATT. RELEASE	Power Switch
	Set to “CAMERA”

Using the battery pack

1Hook-on the battery pack’s top end to the camcorder. (Charging procedure, ☞ pg. 10)

2Push in the battery pack until it locks into place.

To remove the battery pack

Slide BATT. RELEASE and pull out the battery pack.

PLAYBACK

3 Page Button

2

Power Switch

Set to “PLAY”

1System Select Switch Set to “D.S.C.”

1Set the System Select Switch to “D.S.C.”.

2 Set the Power Switch to “PLAY”.

—A still image stored in memory appears. 3 Press “W” or “T” of the Page Button to select

the still image you want to view. (For more details, ☞ pg. 55.)

•The viewfinder switches off automatically to save power when the LCD monitor is opened at an angle of over 45 degrees.

•The LCD monitor turns on/off when it is opened/closed at approx. 45 degrees.

2

System Select Switch

Set to “D.S.C.”

1Slide the LENS COVER Open/Close Switch to open the lens cover.

2Set the System Select Switch to “D.S.C.”.

3 Set the Power Switch to “CAMERA”.

—The power indicator will light and an

image will appear.

4Press the SNAPSHOT Button.

—A still image is shot and is stored in the camcorder’s memory.

(For more details, ☞ pg. 48)

•The viewfinder switches off automatically to save power when the LCD monitor is opened at an angle of over 45 degrees.

•The LCD monitor turns on/off when it is opened/closed at approx. 45 degrees.