EN 11
INFORMATION:
The optional
Read the kit’s instruction manual before using. Also, by using the optional JVC
ATTENTION:
Before detaching the power source, make sure that the camcorder’s power is turned off. Failure to do so can result in a camcorder malfunction.
Using AC Power
To DC connector a
AC Adapter b
Open the cover.
Power Cord
To AC outlet
c
1Connect the AC Adapter to the camcorder a, then connect the Power Cord to the AC Adapter b.
2Plug the Power Cord into an AC outlet c.
NOTES:
●The provided AC Adapter features automatic voltage selection in the AC range from 110 V to 240 V.
●For other notes, pg. 81.
About Batteries
DANGER! Do not attempt to take the batteries apart, or expose them to flame or excessive heat, as it may cause a fire or explosion.
WARNING! Do not allow the battery or its terminals to come in contact with metals, as this can result in a short circuit and possibly start a fire.
The Benefits Of
(If you’re using a heating pad, make sure the battery pack does not come in direct contact with it.)