To make video clips from recorded video footage
MENU Wheel Play/Pause Button (4/9)
VIDEO/MEMORY
Switch
Recording Start/
Stop Button
Power Switch
Y OFF A | M |
PLA |
Lock Button
EN 61
NOTES:
●Approximate maximum recording time per video clip is 3 minutes.
●Playback operation cannot be performed during
●If the end of the tape is reached during
●If the end of the tape is reached in step 6, the
●The video clip files stored with this camcorder are compatible with MPEG4. Some MPEG4 files stored with other devices cannot be played back with this camcorder.
●Video noise may appear while viewing video clips in the LCD monitor or viewfinder, however, this noise is not present in the actual video clips stored in the memory card.
●You can also view video clips on your PC by using Windows® Media Player version 6.4 or later. Refer to the instructions of PC and software.
1
2
3
4
Load a cassette. ( pg. 16) Load a memory card. ( pg. 17)
Set the VIDEO/MEMORY Switch to “VIDEO”.
Set the Power Switch to “P” while pressing down the Lock Button located on the switch.
5
6
Press 4/9 to start video playback.
Press
●
●To cancel
7At the point you want to start dubbing, press the Recording Start/Stop Button to start
8Press the Recording Start/Stop Button to stop
●“COMPLETED” is displayed, then the camcorder
9Press
To view video clips stored in a memory card… Refer to “Playback Of Video Clips
To delete unwanted video clips stored in a memory card…