JVC GR-DVX509ED Still images can be dubbed from a tape to a memory card, Set, To dub the image

EN 65

Dubbing Still Images Recorded On A Tape To A Memory Card (GR-DVX709/509 only)

Still images can be dubbed from a tape to a memory card.

Play/Pause Button (4/9)

VIDEO/MEMORY

Switch

Power Switch

Y OFF A	M
PLA

NOTES:

●If SNAPSHOT is pressed in step 8 when a memory card is not loaded, the message “COPYING FAILED” is displayed.

●If an image recorded on the tape using “WIDE MODE” (
pg. 46) is dubbed to a memory card, the WIDE mode identifying signal is not dubbed with it.

●To use Playback Special effects with a video image you wish to dub, perform up to step 8 using the remote control (provided). (
pg. 69)

●Images are dubbed in 640 x 480 pixels.

SNAPSHOT Button	Lock Button
MENU Wheel

1Load a cassette. (
pg. 16)

2Load a memory card. (
pg. 17)

3Set the VIDEO/MEMORY Switch to “VIDEO”.

4Set the Power Switch to “P” while pressing down the Lock Button located on the switch.

5	Set “	COPY”
	to “ON”.
6	( pg. 38, 51)
	Press 4/9 to start		COPY	– OF F
				ON
7	playback.
	At the point you want
	to dub, press 4/9
	again to engage Still
8	Playback.
	To dub the image,			SP
	press SNAPSHOT.
	● The ”	” indication

blinks during dubbing.

● The selected image is stored in the memory card.