Using The Camcorder As A WebCam (GR-DVX709 only)
This camcorder can be used as a WebCam via USB connection.
VIDEO/MEMORY
Switch
Open the connector cover.
To USB
USB cable (provided)
To USB connector
EN 79
1Make sure all necessary software (provided) are installed in your PC and all units are turned off.
2Connect the camcorder to your PC using the USB cable.
3Set the VIDEO/MEMORY Switch to “MEMORY”.
4Set the Power Switch to “A” or “M” while pressing down the Lock Button located on the switch.
5Turn on the PC.
● “Web CAMERA” appears on the screen.
● If the PC is not |
| We b CAMERA |
PC |
powered on, the camcorder does not enter the Web Camera mode.
6When finished, turn off the PC first, then the camcorder.
Disconnect the USB cable from the camcorder and PC.
NOTES:
●It is recommended to use the AC Adapter as the power supply instead of the battery pack.
( pg. 11)
●Use the provided software PIXELA ImageMixer to capture video in real time.
●You can also use the camcorder for web conference by using Microsoft Windows® NetMeeting® and signing up for MSN Hotmail.
●In the Web Camera mode, the following buttons cannot be operated:
Refer to the instruction manuals of the PC and provided Software.