36 EN | D.S.C. PLAYBACK (cont.) |
Initialising A Memory Card
You can initialise a memory card anytime. After initialising, all files and data stored in the memory card, including those which have been protected, are cleared.
VIDEO/MEMORY Switch
Power Switch
AY OFF A | M |
PL |
Lock Button
MENU Wheel
1Set the VIDEO/MEMORY Switch to “MEMORY”.
2Set the Power Switch to “P” while pressing down the Lock Button located on the switch.
3Open the LCD monitor fully, or pull out the viewfinder fully.
6Rotate the MENU Wheel to select “EXECUTE”, and press it. The memory card is initialised.
●When initialisation is finished, “NO IMAGES STORED”, “NO
●To cancel initialisation, rotate the MENU Wheel to select “RETURN” and press it.
CAUTION:
Do not perform any other operation (such as turning off the camcorder) during initialisation. Also, be sure to use the provided AC Adapter, as the memory card may be corrupted if the battery becomes exhausted during initialisation. If the memory card becomes corrupted initialise it.
4
5
Press the MENU Wheel in. The Menu Screen appears.
Rotate the MENU Wheel to select “FORMAT”, and press it. The FORMAT screen appears.
MENU
PROTECT
DELETE
DPOF
NO . RESET
FORMAT
D I SPLAY
END
FORMAT
ERASE ALL
EX I ST I NG DATA?
EXECUTE
RETURN