EN 25
1Make sure all units are turned off.
2Connect the camcorder to a TV or VCR as shown in the illustration. ( pg. 24)
If using a VCR, go to step 3. If not, go to step 4.
3Connect the VCR output to the TV input, referring to your VCR’s instruction manual.
4Turn on the camcorder, the VCR and the TV.
5Set the VCR to its AUX input mode, and set the TV to its VIDEO mode.
To choose whether or not the following displays appear on the connected TV…
●Date/Time
Set “DATE/TIME” to “AUTO”, “ON” or “OFF”. ( pg. 49)
Or, press DISPLAY on the remote control to turn on/off the date indication.
●Time Code
Set “TIME CODE” to “ON” or “OFF”. ( pg. 49)
●Playback sound mode, tape speed and tape running displays for video playback
Set “ON SCREEN” to “LCD” or “LCD/TV”. ( pg. 49)
NOTES:
●It is recommended to use the AC Adapter as the power supply instead of the battery pack.
( pg. 11)
●To monitor the picture and sound from the camcorder without inserting a tape or memory card, set the camcorder’s Power Switch to “A” or “M”, then set your TV to the appropriate input mode.
●Make sure you adjust the TV sound volume to its minimum level to avoid a sudden burst of sound when the camcorder is turned on.
●If you have a TV or speakers that are not specially shielded, do not place the speakers adjacent to the TV as interference will occur in the camcorder playback picture.
●While the Audio/Video cable is connected to the AV connector, sound cannot be heard from the speaker.
●If no image is displayed or no sound is heard from the TV, set “S/AV INPUT” to “OFF” in the Menu Screen
NOTE:
How to open the LCD monitor when using the
connectors beneath the cover...
1)Open the connector cover.
2)Pull out the connector cover fully.
3)Rotate the connector cover 90° to the left.
4)Open the LCD Monitor.