22 EN
Normal Playback
Rewind Button (3)
VIDEO PLAYBACK
To control the speaker volume…
Turn the Power Zoom Ring toward “T” to turn up the volume, or toward “W” to turn down the volume.
Still Playback
Stop Button (8)
Play/Pause Button (4/9)
VIDEO/MEMORY 
Switch
Power Switch
AY OFF A | M |
PL |
Pauses during video playback.
1)Press 4/9 during playback.
2)To resume normal playback, press 4/9 again.
●If still playback continues for more than about 3 minutes, the camcorder’s Stop mode is automatically engaged.
●When 4/9 is pressed, the image may not pause immediately while the camcorder stabilises the still image.
Shuttle Search
Speaker
Lock Button
Power Zoom Ring
(Speaker Volume
Control)
1Load a cassette. ( pg. 16)
2Set the VIDEO/MEMORY Switch to “VIDEO”.
3Set the Power Switch to “P” while pressing down the Lock Button located on the switch.
4To start playback, press 4/9.
5To stop playback, press 8.
●During Stop mode, press 3 to rewind, or 5 to
NOTES:
●If Stop mode continues for 5 minutes when power is supplied from a battery, the camcorder shuts off automatically. To turn on again, set the Power Switch to “OFF”, then to “P”.
●The playback picture can be viewed in the LCD monitor, viewfinder or on a connected TV.
( pg. 24)
●You can also view the playback picture on the LCD monitor with it flipped over and pushed against the camcorder body.
●LCD monitor/viewfinder indications:
•When power is supplied from a battery: the
“
” battery indicator is displayed. ( pg. 100)
•When power is supplied from an AC outlet: the
“
” battery indicator does not appear.
•During Stop mode, none of the indications are displayed.
●When a cable is connected to the AV connector, the sound is not heard from the speaker.
Allows
1)During playback, press 5 for forward search, or 3 for reverse search.
2)To resume normal playback, press 4/9.
●During playback, press and hold 5 or 3. The search continues as long as you hold the button. Once you release the button, normal playback resumes.
●A slight mosaic effect appears on the display during Shuttle Search. This is not a malfunction.
ATTENTION:
During Shuttle Search, parts of the picture may not be clearly visible, particularly on the left side of the screen.
Frame-By-Frame Playback
Allows
1)Engage Still Playback.
2)During Still Playback, rotate the MENU Wheel toward “+” for forward
3)To resume normal playback, press 4/9.
●You can also use the provided remote control for