JVC LYT1193-001A, GR-PD1 manual After Use, Cleaning The Camcorder

USER MAINTENANCE EN 79

After Use

1Turn off the camcorder.

2Loosen the grip strap.

3Slide and hold OPEN/EJECT in the direction of the arrow, then pull the cassette holder cover open until it locks. The cassette holder opens automatically. Remove the cassette.

4Press “PUSH HERE” to close the cassette holder.

●Once the cassette holder is closed, it recedes automatically. Wait until it recedes completely before closing the cassette holder cover.

5Slide BATT.RELEASE 1 and remove the battery pack 2 3.

Remove.

PUSH HERE Cassette holder

Cassette holder cover

OPEN/EJECT Switch

Cleaning The Camcorder

1To clean the exterior, wipe gently with a soft cloth.

Put the cloth in diluted mild soap and wring it well to wipe off heavy dirt. Then wipe again with a dry cloth.

2Press PUSH OPEN and open the LCD monitor. Wipe gently with a soft cloth. Be careful not to damage the monitor. Close the LCD monitor.

3To clean the lens, blow it with a blower brush, then wipe gently with lens cleaning paper.

4To clean the viewfinder, raise the viewfinder to the vertical position.

5Open the viewfinder cleaning hatch in the direction of the arrow A.

Insert a lens blower or soft cloth into the gap at the bottom of the viewfinder and clean the interior of the viewfinder with it B.

6Close the hatch. Tilt the viewfinder back to the horizontal position and push it back in.

Lens blower

Hatch

	NOTES:
	● Avoid using strong cleaning agents such as
	benzine or alcohol.
	● Cleaning should be done only after the battery
	pack has been removed or other power units have
	been disconnected.
	● Mould may form if the lens is left dirty.
BATT.RELEASE Switch	● When using a cleaner or chemically treated cloth
	refer to the cautions of each product.

REFERENCES