JVC LYT1193-001A Protecting Files, To Remove Protection, To protect the currently displayed file

		EN 29
Protecting Files	To protect the currently displayed file
	7 Rotate the MENU Wheel
The Protect mode helps prevent the accidental	to select “CURRENT”, and	MENU
	press it. The PROTECT	PROTECT CURRENT
erasure of files.		PROT . ALL
	screen appears.	CANC . ALL
Lock Button		RETURN
	8 Press 3 or 5 to
Power Switch
Rewind Button (3)	select the desired file.
	9 Rotate the MENU Wheel
		PROTECT
	to select “EXECUTE”, and
	press it.
Playback Mode Switch	● To cancel protection,	PROTECTED
	select “RETURN”.	RETURN
	● Repeat steps 8 and 9 for
	all files you want to
	protect.

	To protect all files stored in the memory
	card
	7 Rotate the MENU Wheel to select “PROT.ALL”,
MENU Wheel	and press it. The PROTECT screen appears.
	8 Rotate the MENU Wheel to select “EXECUTE”,
Fast-Forward Button (5)
	and press it.
1 Load a memory card. ( pg. 17)
	● To cancel protection, select “RETURN”.
2 Set the Playback Mode Switch to “MEMORY”.	NOTES:
3 Set the Power Switch to “P” while pressing	● If the “ ” mark appears, the currently displayed
down the Lock Button located on the switch.	file is protected.
	● When the memory card is initialised or corrupted,
4 Open the LCD monitor fully, or pull out the
	even protected files are deleted. If you do not want
viewfinder fully.	to lose important files, transfer them to a PC and
● The still image which has been played back at
	save them.
the last time is displayed.

5 Press the MENU Wheel in. The Menu Screen	To Remove Protection
appears.

RECORDING & PLAYBACK

6Rotate the MENU Wheel to select “PROTECT”, and press it. The Sub Menu appears.

MENU

PROTECT

DELETE DPOF

NO . RESET FORMAT

DI SPLAY BR I GHT END

Before doing the following, perform steps 1 – 6 in “Protecting Files” in the left column.

To remove protection from the currently displayed file

7Rotate the MENU Wheel to select “CURRENT”, and press it. The PROTECT screen appears.

8Press 3 or 5 to select the desired file.

9Rotate the MENU Wheel to select “EXECUTE”, and press it.

●To cancel selection, select “RETURN”.

●Repeat steps 8 and 9 for all files you want to remove protection.

DIGITAL STILL CAMERA (D.S.C.)

CONTINUED ON NEXT PAGE